3timeracin

iTrader: (15)

y brother has a Lq4 stock all stock he is doing some upgrades intake and headers and TB typical stuff what cam do you recomend for a daily driver that will slide right in with springs and such ?

SchuttsR1

iTrader: (1)

ls6 cam would work if its in a car.

codysgto

tsp 224 112lsa

ramdaspadhye

iTrader: (3)

What vehicle is it in and what does he do with the car/truck?

3timeracin

iTrader: (15)

Its a 2004 truck he bought a set of AFR 205 heads 65cc chamber and the motor is a Lq9 not 4 i see it has flat tops now that we have it apart ? We have a ported truck intake, ported throttle body and yella terras 1.7 a set of edelbrock headers and the truck has 4.10 gears and a 2300 converter. I was wondering what cams people have used in the past in a setup like this ? I always check my PTV but do not wanna fly cut what does everyone feel is a safe cam to by to avoid cutting pistons ?

3timeracin

iTrader: (15)

I was thinking 226/230 112 or mayber 230/234 112 keep the lift around .600" ? I have done several LS1 and L92 builds but nothing for a truck ?

NemeSS

iTrader: (127)

since its flat tops, might as well and cut in some vr' and just take advantage of afr heads with proper cam.

3timeracin

iTrader: (15)

OK, what is a proper cam with the truck intake ? he does not or should I say will not change the intake and does not take the engine over 6200rpm.