Few Questions.
#1
Teching In
Thread Starter
Join Date: Jun 2009
Location: Augusta, GA
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Few Questions.
I hope I don't get flamed much, but I've searched and haven't found much...
Question one, what is the 5.3 rod length, and question 2, stock 802 LS1 heads, will they fit on a 5.3 bore? I've read that 6.0 LQ9's don't due to bore size but do LS1 heads fit?
Thanks alot guys, sorry to be pesky on questions.
Question one, what is the 5.3 rod length, and question 2, stock 802 LS1 heads, will they fit on a 5.3 bore? I've read that 6.0 LQ9's don't due to bore size but do LS1 heads fit?
Thanks alot guys, sorry to be pesky on questions.
#3
Moderator
iTrader: (20)
I hope I don't get flamed much, but I've searched and haven't found much...
Question one, what is the 5.3 rod length, and question 2, stock 802 LS1 heads, will they fit on a 5.3 bore? I've read that 6.0 LQ9's don't due to bore size but do LS1 heads fit?
Thanks alot guys, sorry to be pesky on questions.
Question one, what is the 5.3 rod length, and question 2, stock 802 LS1 heads, will they fit on a 5.3 bore? I've read that 6.0 LQ9's don't due to bore size but do LS1 heads fit?
Thanks alot guys, sorry to be pesky on questions.
Second, LQ4/LQ9 (317) heads should fit just fine. The 5.3L bore is just enough to fit the 2.00" valve, found in almost any Gen III head, without too much shrouding, but it certainly won't fit the L92/LS3 2.165" valve. So yes, LS1 853 and 241 heads should fit just fine as well.