Automatic Transmission 2-Speed thru 10-Speed GM Autos | Converters | Shift Kits
Sponsored by:
Sponsored by:

th350 swap from t56 driveshaft question

Thread Tools
 
Search this Thread
 
Old 09-28-2009, 10:37 AM
  #1  
Teching In
Thread Starter
 
wht95z28's Avatar
 
Join Date: Jul 2008
Location: miami, fl
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
Default th350 swap from t56 driveshaft question

wuts up guys im swaping out my t56 and putting in a turbo 350 and i am not sure if there is a drive shaft i can put in from another car or do i have to get one made thanks
Old 09-28-2009, 11:22 AM
  #2  
Gingervitis Addict
iTrader: (2)
 
slow67's Avatar
 
Join Date: Nov 2004
Location: DFW
Posts: 2,399
Likes: 0
Received 2 Likes on 2 Posts

Default

If its a long shaft th350, the stock one should work.
Old 09-28-2009, 11:40 AM
  #3  
11 Second Club
iTrader: (20)
 
3rdgen92maro's Avatar
 
Join Date: Aug 2006
Location: Oviedo,Fl/Fairbanks,AK
Posts: 889
Likes: 0
Received 0 Likes on 0 Posts

Default

Just make sure you get a long shaft th350 and the stock DS will work. I have a stock 02 aluminum DS in my car with the th350.
Old 10-26-2009, 09:05 PM
  #4  
Teching In
Thread Starter
 
wht95z28's Avatar
 
Join Date: Jul 2008
Location: miami, fl
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
Default

no it has a regular tailshaft where can i get this tailshaft and how much does it cost
Old 10-26-2009, 09:08 PM
  #5  
11 Second Club
iTrader: (12)
 
01FbTaWs6's Avatar
 
Join Date: May 2005
Location: Cedar Rapids, IA
Posts: 1,142
Likes: 0
Received 0 Likes on 0 Posts

Default

just get a custom one made.
Old 10-26-2009, 09:11 PM
  #6  
Teching In
Thread Starter
 
wht95z28's Avatar
 
Join Date: Jul 2008
Location: miami, fl
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
Default

that was my original plan was i posted the thread to see what the measurement was so i can have one made befor i put the trans in the car
Old 10-26-2009, 09:48 PM
  #7  
11 Second Club
iTrader: (12)
 
01FbTaWs6's Avatar
 
Join Date: May 2005
Location: Cedar Rapids, IA
Posts: 1,142
Likes: 0
Received 0 Likes on 0 Posts

Default

oh, ok. You will have to measure once its in the car, or ask one of the sponsors. Bob at EPP might even have them listed on Exotic Performance Plus's site.
Old 10-26-2009, 09:59 PM
  #8  
Teching In
Thread Starter
 
wht95z28's Avatar
 
Join Date: Jul 2008
Location: miami, fl
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
Default

yea thats what im gonna do the tranny is goin in this weekend thanks alot man



Quick Reply: th350 swap from t56 driveshaft question



All times are GMT -5. The time now is 03:21 AM.