Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

Trans Prob

Thread Tools
 
Search this Thread
 
Old 10-18-2009, 12:42 PM
  #1  
Teching In
Thread Starter
 
93ztwentyeight's Avatar
 
Join Date: Jul 2009
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Default Trans Prob

I have a 93 z28 M6, and it is getting harder and harder to get my car in reverse and first. it seems harder when the car is cold. Also the clutch pedal is dead until about halfway down.

I'm wondering if this is syncros, bearings or cylinder. any help would be greatly appreciated . thanks guys
Old 10-18-2009, 01:04 PM
  #2  
Banned
iTrader: (60)
 
thesource's Avatar
 
Join Date: Mar 2005
Location: Adkins - Tx
Posts: 2,693
Likes: 0
Received 0 Likes on 0 Posts
Default

Sounds like a clutch hydraulic issue to me.
Old 10-18-2009, 01:17 PM
  #3  
Teching In
Thread Starter
 
93ztwentyeight's Avatar
 
Join Date: Jul 2009
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Default

how would i go about fixing this?
Old 10-18-2009, 07:11 PM
  #4  
FormerVendor
iTrader: (38)
 
Gen414's Avatar
 
Join Date: Nov 2008
Location: Pearland, TX
Posts: 2,309
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by 93ztwentyeight
how would i go about fixing this?

replace MC first. If fixes problem, great. If not, move to slave cylinder. Should be taken care of by then...
Old 10-19-2009, 10:57 PM
  #5  
Teching In
Thread Starter
 
93ztwentyeight's Avatar
 
Join Date: Jul 2009
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Default

im guessing they are expensive
Old 10-19-2009, 11:33 PM
  #6  
TECH Regular
iTrader: (18)
 
cody161's Avatar
 
Join Date: Feb 2007
Location: Bowling Green, ky
Posts: 460
Likes: 0
Received 0 Likes on 0 Posts
Default

you might try checking your fluid and bleeding the hydraulics first, this might help some. these cars are known to have bad clutch hydraulics so replacing the master with an upgraded one would be the best bet to solve your issue.




All times are GMT -5. The time now is 02:51 PM.