ABS INOP after Moser M9 Install, 3 Channel ABS
#1
TECH Enthusiast
Thread Starter
iTrader: (16)
Join Date: Nov 2004
Location: Birmingham, AL
Posts: 577
Likes: 0
Received 0 Likes
on
0 Posts
ABS INOP after Moser M9 Install, 3 Channel ABS
My Moser M9 is installed and the ABS isn't working correctly along with the ABS INOP light. This is a 3 channel ABS car. For those of you who have had this problem, what was the solution?
Thanks
Thanks
#4
12 Second Club
iTrader: (6)
Join Date: Jun 2004
Location: Ft. Irwin, California (But Virginia is home)
Posts: 1,501
Likes: 0
Received 7 Likes
on
1 Post
The sensor has to be shimmed to provide the proper gap to the center section. Too much and it won't register. Too little and the center section gear will shave the end of the ABS sensor. It's been 2 years since I did mine, but I think it was around .060 gap.
#6
LS1Tech Sponsor
iTrader: (16)
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website