Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

Hard to shift when running through the gears

Thread Tools
 
Search this Thread
 
Old 11-25-2009, 07:08 AM
  #1  
Teching In
Thread Starter
iTrader: (5)
 
Tripdagoat's Avatar
 
Join Date: Dec 2004
Location: Connecticut
Posts: 26
Likes: 0
Received 0 Likes on 0 Posts

Default Hard to shift when running through the gears

I swapped an ls2 6 speed combo out of a 2006 gto into my 78 Malibu. Stock engine, transmission, clutch, new GM clutch slave and master ordered for a 2000 ss camaro. Here is my problem, I drive the car normally its fine, when I run through the gears shifting at about 6k and by the time I go to shift 3rd the pedal feels like its on the floor, pumping it does not help, and i have to wait to catch 3rd, let the car recover for about 5 to 10 seconds and i can shift again. Clutch slave is bled properly no air in the system. I have heard a bad slave cyl will do this, but a brand new one from GM?
Old 11-25-2009, 05:00 PM
  #2  
10 Second Club
iTrader: (55)
 
AFASTYZFR1's Avatar
 
Join Date: Feb 2007
Location: Florida
Posts: 1,746
Likes: 0
Received 1 Like on 1 Post

Default

Get a Tick master cylinder!




All times are GMT -5. The time now is 01:07 AM.