Replacing rod ends on PHR
#1
Replacing rod ends on PHR
I am pretty sure my rod ends are worn out on my PHR. I was taking a look at the QA1 rod ends, but I'm not sure which ones would be appropriate for a PHR. Anyone have some insight or suggestions on which kind to go with for a street car?
#2
Who manufactured the bar if you don't mind me asking? I just figured seeing how you are asking what other options do you have. Below is a link to show you what all options UMI Performance has to offer.
http://www.umiperformance.com/catalo...a4rffrjv8hu295
http://www.umiperformance.com/catalo...a4rffrjv8hu295
We also offer replacement QA1 self lubricating rod ends for $29.99 each.
If you have any other questions feel free to ask and I will be more than glad to help.
Thanks
Brad
http://www.umiperformance.com/catalo...a4rffrjv8hu295
http://www.umiperformance.com/catalo...a4rffrjv8hu295
We also offer replacement QA1 self lubricating rod ends for $29.99 each.
If you have any other questions feel free to ask and I will be more than glad to help.
Thanks
Brad
#3
Umi, Strano, Summit carry them. I got replacements for my (purchased used) BMR adj PHR - these were QA1 teflon lined - $10 or $12 ea plus shipping etc. One is RH thread, the other is - you guessed it -LH thread. Support our sponsors!
#4
TECH Regular
iTrader: (2)
Join Date: Apr 2008
Location: SoCal
Posts: 456
Likes: 0
Received 0 Likes
on
0 Posts
If you have a UMI PHR can you replace with the new roto/joints?
http://www.umiperformance.com/catalo...ndex&cPath=199
http://www.umiperformance.com/catalo...ndex&cPath=199
Last edited by redracer1; 01-05-2010 at 04:08 PM.