02f150

I was wanting to get my stock throttle body ported by Jantzer Performance on ebay, but after looking at all the bad comments regarding them I decided I'm going to try and find someone else to do it. Who else can I send it to for it to get ported, get the front throttle shaft cut, and get that bump stop mod done?

TS6

iTrader: (41)

Sean, the powder pro, SN is silverghost

SWEET98SS

iTrader: (8)

New era performance, they are a sponsor. If you look way back, someone did a back to back comparison, it was like 7 or 10 hp for $75, worth every penny.

Skeet12

iTrader: (1)

+1 On New Era Performance. They did a great job and had a quick turn around. I was cautious at first since my car only had 11,000 miles. I got my TB back and looks and performs great. I did not due comparison but "seat of pants" proves it. Worth every penny of $75.00, cheapest I've seen.

Quik Sand

iTrader: (6)

If its a DD is there anyone who just sells them outright?

SilverGhost

iTrader: (53)

I'm at $65 shipped(always have been), so they are not the cheapest

02f150

SilverGhost how quick is your turn around in most cases? all i'm wanting isjust a port nd polished tb and that bump-mod done

SilverGhost

iTrader: (53)

Couple days typically for porting with no powder.

00blacka4

iTrader: (7)

silverz28camaro did a really good job on mine

studderin

iTrader: (28)

+1 New Era I went 11.1s @124 stock maff/bellow/stock LS6 intake. For a $75 TB port I was happy.
Then I did the fast92/92/big maff/bellow setup and gian 11whp $1400

MjMaro

iTrader: (11)

I'm a believer in Sean (SilverGhost), great guy to deal with and exceptional work.

thewholefnshow1

iTrader: (2)

Shaner 3 is a great piece don't know about the others.

Bo White

iTrader: (59)

Dont think Shaner is a sponsor although he does great work.
IMHO, use a sponsor. They pay money to support the site for you guys to hang out on.

slolt1

iTrader: (75)

are u still porting bo i had a set of heads and throttle body that you did and it was a great job