Black S-Dime Project...
04-06-2010, 12:09 AM
#1
Teching In
Thread Starter
iTrader: (3)
Join Date: Mar 2010
Location: Davenport, Ia
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Black S-Dime Project... started gathering the parts for my lsx swap about a month ago, and figured it was about time to put up a build thread:
the victim: S-10 SS 50,xxx original miles, second owner.
have since undercoated frame, pics to come
sold beat up bed to a buddy, found one at a junk yard in much better condition
interior is completely gutted, wasnt my choice, its how i bought it
however, i have all the parts, including screws, fasteners etc
time for the good stuff:
5.3 with 50,xxx miles and ls1 intake (still needs to be cleaned up and painted)
tsp torquer v2 cam
PAC 1518 springs, and thunder racing comp push rods with a ls2 timing chain
also have a TH350 and a TCI street fighter with a 3800 stall...
wheels: courtesy of winger4800 -
also plan on buying longtubes in the near future
more to come... should be getting cam in this weekend and hopefully get the motor painted up.
the victim: S-10 SS 50,xxx original miles, second owner.
have since undercoated frame, pics to come
sold beat up bed to a buddy, found one at a junk yard in much better condition
interior is completely gutted, wasnt my choice, its how i bought it
however, i have all the parts, including screws, fasteners etc
time for the good stuff:
5.3 with 50,xxx miles and ls1 intake (still needs to be cleaned up and painted)
tsp torquer v2 cam
PAC 1518 springs, and thunder racing comp push rods with a ls2 timing chain
also have a TH350 and a TCI street fighter with a 3800 stall...
wheels: courtesy of winger4800 -
also plan on buying longtubes in the near future
more to come... should be getting cam in this weekend and hopefully get the motor painted up.
Last edited by kruse10490; 04-06-2010 at 12:21 AM.
