ran into a problem yesterday with intake
#1
Teching In
Thread Starter
Join Date: Mar 2010
Location: Fayetteville, NC
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
ran into a problem yesterday with intake
currently i have the k&n intake system. i ordered the slp system while i was deployed and im trying to put all my parts on. but the problem i have is that i didnt know the slp system needed the stock intake setup. i no longer have the stock. now is there anyone that has come to this problem? if so what might i do to customize it to work or where could i order the stock system so i can set the slp system up correctly?
#3
Teching In
Thread Starter
Join Date: Mar 2010
Location: Fayetteville, NC
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
the k&n system just came with a metal base plate which replaced the plastic piece that the lid goes over. now that metal air inductor that goes in front of the radiator that came with the slp system is covered over by the k&n base plate and there is no where to bolt the slp system up to
#6
Teching In
Thread Starter
Join Date: Mar 2010
Location: Fayetteville, NC
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
i dont have that lower air box, so did you do it without any of that plastic stuff? cause i got the full slp system but it only comes with the top airbox lid and filter with the other hoses and stuff