Trying not to have a "forsale" add about it but..
01-14-2004, 10:39 AM
#1
8 Second Club
Thread Starter
iTrader: (1)
Join Date: Nov 2001
Location: Friendswood
Posts: 10,121
Likes: 0
Received 0 Likes
on
0 Posts
Trying not to have a "forsale" add about it but.. How would I go about selling 2x 200-4R Converters out of my LS1. They are both for nitrous. One is a extreme n2o converter from Yank, its a VERY tight 3600 and the other is a motor/nitrous custom TCS converter (stall speed is ~4200). I am getting a new one, but I can't budget it unless I sell both of these. Please do not move... I dont know where to put them so that people willl find them.
01-14-2004, 10:48 AM
#2
TECH Apprentice
iTrader: (3)
Join Date: Sep 2002
Location: belleville IL
Posts: 347
Likes: 0
Received 0 Likes
on
0 Posts
Well, for one does your 200r4 bolt right up to the motor or does it use an adapter plate? Its going to make a difference on if the converter will work with what set up.
01-14-2004, 10:53 AM
#3
8 Second Club
Thread Starter
iTrader: (1)
Join Date: Nov 2001
Location: Friendswood
Posts: 10,121
Likes: 0
Received 0 Likes
on
0 Posts
Not to sound stupid. It was built by Mike Kurtz at Century Transmission. The tranny was right around $7000 for it all. So I'm guessing its the best of the best. Someone who has a Mike Kurtz let me know.
01-14-2004, 01:24 PM
#7
Just jack up one side of the car, take a look under there and see if the tranny is bolted right up to the back of the motor, or if it has an adapter plate. Theres a difference in the way they build the converters whether or not your run the adapter plate or not. Might want to go to some Buick boards and post them on there, you could have great luck there!
