merim123

iTrader: (11)

after suffering for so many years with my crappy stock horns that were rusted out, i finally decided to change them.

I used the FIAMM part # 72012 Low tone and the FIAMM part # 72002 high tone. took me about 15 minutes to get them changed, I had the car up for another reason and decided to change them while I was down there.

I didn't cut the stock wiring harness, I just used two of those 3M inline connectors and got it all together pretty easily.

Well worth the change, and it was really cheap for those considering it. I got all the parts through amazon.

MasterTomos

iTrader: (15)

and videos

merim123

iTrader: (11)

lol - pics and videos for a horn install, didn't have the chance, that's why it took 15 minutes. Thought I would share the part #'s and the timing in case anyone else was searching. next time i get under there, i'll take some pics so you guys can see how i mounted them. but all straightforward and simple.

brucer

dont need no stinking horns..
i just yell at people, flip them off and flip my mullet at them..

Slow94Formula

iTrader: (18)

or just open up the cutout and rev on it!

z_speedfreak

iTrader: (3)

louder than stock? I can't hear mine at all when cruising over 2000rpm and neither can any one else

merim123

iTrader: (11)

they are definitely louder than stock that i had, but they were dying. Now I can actually hear the crispness of the horns on the highway without issues.