lets see your enginebays!
#1
Teching In
Thread Starter
lets see your enginebays!
Alright so Im a HUGE fan of clean engine bays. A clean engine bay shows how much a person cares for they're car. Mad respect for someone that keeps thery're motor clean! Lets see some pics of your bays. Birds and Maros are welcome!
I'll start out with mine. I had too sell some goodies due to the ecomomy.. things missing; granatelli m.a.f, trickflow intake elbow, and bmr strut brace
I'll start out with mine. I had too sell some goodies due to the ecomomy.. things missing; granatelli m.a.f, trickflow intake elbow, and bmr strut brace
#5
alternator is down low where the ac compressor used to be. i'm using the speed inc. relocation bracket. the centerbolt valve covers were bought off ebay. they're just centerbolt sbc vc's.
Trending Topics
#14
12 Second Club
iTrader: (15)
Join Date: Mar 2007
Location: Cheyenne, Wy
Posts: 1,928
Likes: 0
Received 0 Likes
on
0 Posts
that was immediately following the hood modification to fit my SLP intake..........fiberglass plus cutoff wheel equals white **** EVERYWHERE lol. Its ALOT cleaner now and that was taken at night with a flash so EVERYTHING showed up haha
#15
Teching In
Thread Starter
hose that **** down with armorall and clean the pollished with windex! i used a whole bottle of armorall on mine when i first did it
#16
my advise is to take everything apart and clean it.
#17
12 Second Club
iTrader: (15)
Join Date: Mar 2007
Location: Cheyenne, Wy
Posts: 1,928
Likes: 0
Received 0 Likes
on
0 Posts
I agree with scj. I am always working on my engine anyways so when I take something off, I clean it and everything it exposes. Sometimes I just take things off strictly FOR cleaning lol. I have been slacking lately because I am getting ready to pull the engine before too much longer and repaint the engine bay