What psi to run in MT Et Street Radial?
08-22-2010, 09:36 PM
#1
What psi to run in MT Et Street Radial? What pressure do you guys run on your drag radials? Ive been around 18-20psi and they have been hooking quite well. Just wanted to get other opinions, thanks! This is on the 255 50 16 size.
Jason
Jason
08-22-2010, 11:15 PM
#4
10 Second Club
iTrader: (7)
Join Date: Aug 2007
Location: NYC
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
255/50R16 and I set them to around 18psi cool (before my first pass) which usually gets me around 20psi hot (after a run), sometimes they check a little higher and I reset them back to 20psi. I've only got 15 passes on this current setup but seems to be working with a best 60ft 1.651 and worst was 1.674
HTH,
Steve
HTH,
Steve
