Cheap-O build
09-06-2010, 06:44 PM
#1
Teching In
Thread Starter
Join Date: Sep 2009
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Cheap-O build Ok so started are cheap 10.xx build last night. The current setup on are 98 T/A is - stock 178,000 mile motor with local built trans, not so local tune, 3600 PI stall, borla catback, pacesetter LTs, ORY, slp lid, 150 shot, subframe connecters, a set or prostars went a best of...
1.61 - 60 ft
7.40 - 1/8 et
93.15 -1/8 mph
11.62-1/4 et
116.16 - 1/4 mph
still plan on messing with this setup more untill we finish the new one.
well anyways the other night we picked up a 60,xxx motor and plan on going with a set of 243's, ls6 intake and ....well havent decided on the cam yet, but you guys get the idea cam only set up with some nitrous trying to break some 10 sec 1/4 miles. will post more as it comes along.
1.61 - 60 ft
7.40 - 1/8 et
93.15 -1/8 mph
11.62-1/4 et
116.16 - 1/4 mph
still plan on messing with this setup more untill we finish the new one.
well anyways the other night we picked up a 60,xxx motor and plan on going with a set of 243's, ls6 intake and ....well havent decided on the cam yet, but you guys get the idea cam only set up with some nitrous trying to break some 10 sec 1/4 miles. will post more as it comes along.
