62-67 Chevy 2 Kits (Starting Mock-Up)
#1
FormerVendor
Thread Starter
iTrader: (3)
Join Date: Jan 2003
Location: Cumming, GA
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
62-67 Chevy 2 Kits (Starting Mock-Up)
We've been trying to find the right car to use to mock-up our NEW conversion kit on, well today we found one. The customer dropped it off a few minutes ago, the car is in real good condition. We've been working on building a kit that will cover all fo the Chevy 2s and not require the customer to go out and source a pair of factory V8 frame brackets, so as we get it mocked-up we'll post pictures. Hedman Hedders will be building the headers as soon as we get done with the kit.
Jeff
Jeff
#3
I e-mailed my Dad about this and he is stoked. Has plans to put a 6.0L in a '64 Nova wagon and possibly a '62 convert. Have you visited www.stevesnovasite.com?
Keep us posted?
Keep us posted?
#4
they are ridiculously priced and require their rack and pinion setup for them to work... if i wanted to drop that much $$$ i would buy a front clip it would be very close in price once that's all added up. that's my opinion anyway..
If someone comes out with a set that are reasonably priced and work with the stock clip and steering box i will buy them, if not i will build my own
If someone comes out with a set that are reasonably priced and work with the stock clip and steering box i will buy them, if not i will build my own
Our headers not only work with the stock front end and, Yes, our rack and pinion but, with the bolt on front clips as well. Port spacing and the gear box made it very tricky to try and make a set of headers work for both applications, rack and stock steering. Believe me we attempted to accommodate both systems. We insisted on using an 1-3/4" primary tubing along with clean aesthetics. For a customer with the rack or bolt on front clip the header tubes would have looked completely out of place being snaked all over for no apparent reason.
For comparison sakes here is the price from Summit for a very good set of Gen1 small block headers that actually fit.
Hooker Headers 2243-1HKR - Hooker Super Competition Headers
View Image and Compare
* Hooker Headers 2243-1HKR - Hooker Super Competition Headers
* Compare
Headers, Super Competition, Full-Length, Steel, Ceramic Coated, Chevy, Chevy II, Nova, Small Block
Part Number: HOK-2243-1HKR More Detail …
Estimated Ship Date: Today
Transaction
* $749.95
Now when it comes to fitment, our headers fit as good as they look and are made here in the USA. BRP will make a very nice set up as they have been doing this for many other applications, just don't expect good quality products to be given away.
#5
FormerVendor
Thread Starter
iTrader: (3)
Join Date: Jan 2003
Location: Cumming, GA
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
When we started designing how we wanted this kit to bolt-in we looked at quite a few factors, there were already kits offered that could use the adapter plates and the V8 mounts and there are quite a few aftermarket front clips available, we decided to build this kit around the factory front clip and make it so that it will bolt-in without the factory V8 mounts. Another important part of our kit is compatibility with the factory steering, power brakes and at least one factory oil pan. We will make sure that our kit has the correct driveline angle and good fitment.
#7
TECH Resident
iTrader: (57)
CBR provides good quality parts, hand made, one at a time. If you think the cost is too high, you probably have the wrong hobby. Quality is not cheap........
T,
Trending Topics
#8
12 Second Club
iTrader: (10)
ALWAYS WANTED a nova... 67 or 70 personally but in the F body world lotta things aint cheap and quality is one of em...however..before anybody bitches abotu how much it costs..consider the hobby you are in..what you get for your money..how long it needs to last you..be thankfull that there ARE aftermarket companys out there who share your passion and make something for your particular car...and lastly if all you are going to do is bitch about it...then go ahead and make a suprior product and do it cheaper..
#9
Wow
I didn't say it wasn't nice quality stuff but $1000 for headers that require me to run their rack setup for another $2000 is a bit pricey when all i need is a set of headers... way too many church boys nut swingers on steves and i see they are migrating here as well, not everyone wants to run their setup so why does every thread about other company's making products for chevy ii need to turn into another everyone buy chucks overpriced stuff thread
sorry for your thread getting hijacked BRPhotrods. I look forward to seeing what you will be offering for chevy ii's, the more options the better IMO
sorry for your thread getting hijacked BRPhotrods. I look forward to seeing what you will be offering for chevy ii's, the more options the better IMO
#10
TECH Resident
iTrader: (57)
When we started designing how we wanted this kit to bolt-in we looked at quite a few factors, there were already kits offered that could use the adapter plates and the V8 mounts and there are quite a few aftermarket front clips available, we decided to build this kit around the factory front clip and make it so that it will bolt-in without the factory V8 mounts. Another important part of our kit is compatibility with the factory steering, power brakes and at least one factory oil pan. We will make sure that our kit has the correct driveline angle and good fitment.
Is this going to keep the engine in the stock location, like current mounts do?
If I wanted to use standard mounts and adapter plates, are your headers going to fit with them?
Will your headers clear 4 speed, and\or column shift linkage, and stock steering?
What one pan...GTO front sump only, or what cause that's the only stock pan that will work with stock steering that I have seen?
What price range are we talking about?
If GTO is the one pan, can I use your headers with a CBR rack and pinion, or is this question answered in question #1?.....
Sounds like it's going to be a pretty proprietary kit, unless you can answer yes to the first three questions.
This kit has been promised for close to a year, and hasn't shown up yet, so let's see how these questions get answered, and then you can get your cheap headers, if they'll work without buying their whole kit.....right now, to get their kit to work on a 3rd gen x-body, is about 1500 bucks...cheap enough for ya?...go look at their website.....
Oh and wtf.suv, grow up, you don't have to get butt hurt and start name calling just because somebody already makes good **** that works. I don't know who's been blowing smoke up your ***, but the CBR kit is no where near 2 grand, I did mine for under a grand, if you are smart about it.....
Signed,
Loyal CBR Nuthugger.....
#12
Just another nut swinger here, I am in the middle of a 62 nova wagon build for my wife, carbed 5.3 and 700r4, I like most car builders am looking for the best bang for the buck, but what is quality and customer service worth. I've been building cars ever sense high school and I may sound bias but I have never met anyone like the Church boy's, My hot rods are American made and I want American parts on them. Chuck listens to his customers and wants to build the best possible product for them (what the f is wrong with that) they are not cheap but like the old saying goes you get what you pay forsorry to jump in this thread, I guess I'll take my swinging ***** back over to Steve's
Last edited by voodooII; 09-15-2010 at 04:11 PM.
#13
Staging Lane
Join Date: Jun 2010
Location: post falls, id
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
im F-IN STOKED!!!! sign my *** up for a set of headers.
the mounts i have factory v8 mounts if you could find a way to make it so your gen 1 mounts bolted right to the adapter plates that would kick ***. seeing as i use solid mounts.
:to the kits
the mounts i have factory v8 mounts if you could find a way to make it so your gen 1 mounts bolted right to the adapter plates that would kick ***. seeing as i use solid mounts.
:to the kits
#14
On The Tree
iTrader: (2)
Join Date: Jul 2008
Location: Corona, CA
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
I think the difference is the kids want cheap parts just to bolt on and not know the purpose or function. The old classic car builders know the facts and like to do the job once the right way, not 2-3 times.
#15
FormerVendor
Thread Starter
iTrader: (3)
Join Date: Jan 2003
Location: Cumming, GA
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
The price will be determined once we finalize how many parts we have to design and build for it, how much time it takes to build the parts once we have the jigs built and how much of a market there is for it. With that said we work hard to keep the price in the $479 to $499 for the conversion kit.
This kit has been promised for close to a year, and hasn't shown up yet, so let's see how these questions get answered, and then you can get your cheap headers, if they'll work without buying their whole kit.....right now, to get their kit to work on a 3rd gen x-body, is about 1500 bucks...cheap enough for ya?...go look at their website.....
Oh and wtf.suv, grow up, you don't have to get butt hurt and start name calling just because somebody already makes good **** that works. I don't know who's been blowing smoke up your ***, but the CBR kit is no where near 2 grand, I did mine for under a grand, if you are smart about it.....
Signed,
Loyal CBR Nuthugger.....
Oh and wtf.suv, grow up, you don't have to get butt hurt and start name calling just because somebody already makes good **** that works. I don't know who's been blowing smoke up your ***, but the CBR kit is no where near 2 grand, I did mine for under a grand, if you are smart about it.....
Signed,
Loyal CBR Nuthugger.....
Last edited by BRPhotrods; 09-16-2010 at 08:37 AM.
#16
FormerVendor
Thread Starter
iTrader: (3)
Join Date: Jan 2003
Location: Cumming, GA
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
Just another nut swinger here, I am in the middle of a 62 nova wagon build for my wife, carbed 5.3 and 700r4, I like most car builders am looking for the best bang for the buck, but what is quality and customer service worth. I've been building cars ever sense high school and I may sound bias but I have never met anyone like the Church boy's, My hot rods are American made and I want American parts on them. Chuck listens to his customers and wants to build the best possible product for them (what the f is wrong with that) they are not cheap but like the old saying goes you get what you pay forsorry to jump in this thread, I guess I'll take my swinging ***** back over to Steve's
#17
TECH Resident
iTrader: (57)
Probably not, the design we are working is close to the same location, but not exact. When we setup our mounts we don't build them around other mounts, simply because that is not the most important factor to us. The motor will be placed where it has the correct geometry and the best clearance. sometimes we have to lower the engine or move it forward so that we can obtain the correct geometry.
They might, I'll more once we finalize the location of the engine. That is the main reason we are trying to stay close the the location, but I stated before the most important factor in the placement of the engine is the correct geometry.
Initially we will setup the kit using a 4L60E/4L65E and a T-56, we don not build it around the factory column shift, all of our footnotes state "does not work with factory column shift without modifications" we have modified the column shift to work in some applications. It will fit with stock steering.
They GTO pan is the pan we are working with, but after we get the location settled we'll try other pans if it looks like any of them will fit.
The price will be determined once we finalize how many parts we have to design and build for it, how much time it takes to build the parts once we have the jigs built and how much of a market there is for it. With that said we work hard to keep the price in the $479 to $499 for the conversion kit.
I don't know, if they want to send us a rack to try it with we'd be glad to test-fit it and see.
Realistically our kits do tend to be proprietary simply because we don't build them around a certain location, we build them around the correct driveline geometry.
Yeah, ever since I started here (about a year ago) we've been trying to get a good car to use for mock-up. I hate that we've been promising it and not being able to actually build it. We started working on it using a front clip we have from a previous project, but we couldn't finalize any of it until we had a actual car to build it on. We never said that the CBR stuff is lacking in any way, we build our kits to work with all of the stock accesories/components whenever possible.
They might, I'll more once we finalize the location of the engine. That is the main reason we are trying to stay close the the location, but I stated before the most important factor in the placement of the engine is the correct geometry.
Initially we will setup the kit using a 4L60E/4L65E and a T-56, we don not build it around the factory column shift, all of our footnotes state "does not work with factory column shift without modifications" we have modified the column shift to work in some applications. It will fit with stock steering.
They GTO pan is the pan we are working with, but after we get the location settled we'll try other pans if it looks like any of them will fit.
The price will be determined once we finalize how many parts we have to design and build for it, how much time it takes to build the parts once we have the jigs built and how much of a market there is for it. With that said we work hard to keep the price in the $479 to $499 for the conversion kit.
I don't know, if they want to send us a rack to try it with we'd be glad to test-fit it and see.
Realistically our kits do tend to be proprietary simply because we don't build them around a certain location, we build them around the correct driveline geometry.
Yeah, ever since I started here (about a year ago) we've been trying to get a good car to use for mock-up. I hate that we've been promising it and not being able to actually build it. We started working on it using a front clip we have from a previous project, but we couldn't finalize any of it until we had a actual car to build it on. We never said that the CBR stuff is lacking in any way, we build our kits to work with all of the stock accesories/components whenever possible.
Few more questions, will the 479-499 price range include the headers, as in a turn key swap package, or will they be additional?
If headers are additional, what do you anticipate the out the door price to be?
Will this kit include a crossmember, since you may be moving location?
Will the location accomodate the low mount stock A/C compressor?
Just to clarify, I never said your products were inferior, and never will, don't believe in vendor bashing...poor form and immature ......
The reference to CBR was merely stating that he has walked the path you are on now. I have spent more than a few hours with Chuck on the phone, tape measure in hand, taking notes and discussing the very things mentioned here. I think you are going to find it is very problematic to please everyone in their swap configurations which is exactly where Church was when he R&D'd the headers. He had the steering design and ran with it and worked the headers in. Yeah in crossthreaded a lot of people, still does, too expensive, proprietary system, blah, blah, blah, ad nauseum....sour grapes if you ask me....but he did it his way....just like you are doing....not much difference IMO........
Give Chuck a call, he is a pretty forward thinking guy, and a super human being, he just might be interested in a BRP/Church Boys joint venture, wouldn't hurt to ask.......I think it would be a great thing, and yet another option for the forgotten Chevy II owners......
Good luck on the conversion, and please keep us posted. Put up some eye candy, everybody likes pictures of car parts....
T,
Last edited by TomM; 09-16-2010 at 09:47 AM.
#18
Just to clarify, I was suggesting that your product wasn't made here, but glad to here it is
#19
FormerVendor
Thread Starter
iTrader: (3)
Join Date: Jan 2003
Location: Cumming, GA
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
Yes, the conversion kit will include a new crossmember and polyurethane transmission mount.
That is something I just don't know yet, after we finish the mock-up we test fit as many factory accesory drive systems as possible. Then we note which accessory drive systems fit in our installation guide, if something fits with a slight modification we try to note that also.
Just to clarify, I never said your products were inferior, and never will, don't believe in vendor bashing...poor form and immature ......
The reference to CBR was merely stating that he has walked the path you are on now. I have spent more than a few hours with Chuck on the phone, tape measure in hand, taking notes and discussing the very things mentioned here. I think you are going to find it is very problematic to please everyone in their swap configurations which is exactly where Church was when he R&D'd the headers. He had the steering design and ran with it and worked the headers in. Yeah in crossthreaded a lot of people, still does, too expensive, proprietary system, blah, blah, blah, ad nauseum....sour grapes if you ask me....but he did it his way....just like you are doing....not much difference IMO........
Give Chuck a call, he is a pretty forward thinking guy, and a super human being, he just might be interested in a BRP/Church Boys joint venture, wouldn't hurt to ask.......I think it would be a great thing, and yet another option for the forgotten Chevy II owners......
Good luck on the conversion, and please keep us posted. Put up some eye candy, everybody likes pictures of car parts....
T,
The reference to CBR was merely stating that he has walked the path you are on now. I have spent more than a few hours with Chuck on the phone, tape measure in hand, taking notes and discussing the very things mentioned here. I think you are going to find it is very problematic to please everyone in their swap configurations which is exactly where Church was when he R&D'd the headers. He had the steering design and ran with it and worked the headers in. Yeah in crossthreaded a lot of people, still does, too expensive, proprietary system, blah, blah, blah, ad nauseum....sour grapes if you ask me....but he did it his way....just like you are doing....not much difference IMO........
Give Chuck a call, he is a pretty forward thinking guy, and a super human being, he just might be interested in a BRP/Church Boys joint venture, wouldn't hurt to ask.......I think it would be a great thing, and yet another option for the forgotten Chevy II owners......
Good luck on the conversion, and please keep us posted. Put up some eye candy, everybody likes pictures of car parts....
T,