Torquer v3 and push rod length
#1
Torquer v3 and push rod length
Ok putting in my torquer v3 in next week with stock 241 heads. Pushrod length checker is on the way....but what numbers can i expect to be around? 7.4? 7.375? Just wanna make sure im in the ballpark.
#4
FormerVendor
iTrader: (18)
Definitely measure but on an otherwise stock motor I would expect 7.425". If you're measurement is in that ballpark, you will be fine. If it is drastically different one way or the other, you know you are doing something wrong on the measurement. But I definitely agree to measure before so you only have to purchase pushrods once!
Jon
Jon