Reults of new build
#1
11 Second Club
Thread Starter
Join Date: Mar 2009
Location: MD
Posts: 205
Likes: 0
Received 0 Likes
on
0 Posts
Reults of new build
First off a big THANKS to all who gave advice, listened to my rants, and/or supplied parts:
Fran at RPM, PatG, Brian at Reckart, Mike at RotoFab, Charlie, George, John, and whoever
else I forgot to mention.
The car feels like a totally different car to drive. And that's hard to imagine since the build
that we took out ran a 11.66 .... There's more torque down low and more
hp at the high end. I couldn't go too crazy, the roads were still a little damp from all the
rain we've had the last two days. Hopefully I can make it to Cecil on WED.
A couple of engine pics
And now the results. This graph is a comparison of
of the old vs new build. I was told that the best way
to show the difference in power would be to use
uncorrected hp.
_________________
Links
http://mystudios.com/g8/new01.jpg
http://mystudios.com/g8/new02.jpg
http://mystudios.com/g8/new03.jpg
Fran at RPM, PatG, Brian at Reckart, Mike at RotoFab, Charlie, George, John, and whoever
else I forgot to mention.
The car feels like a totally different car to drive. And that's hard to imagine since the build
that we took out ran a 11.66 .... There's more torque down low and more
hp at the high end. I couldn't go too crazy, the roads were still a little damp from all the
rain we've had the last two days. Hopefully I can make it to Cecil on WED.
A couple of engine pics
And now the results. This graph is a comparison of
of the old vs new build. I was told that the best way
to show the difference in power would be to use
uncorrected hp.
_________________
Links
http://mystudios.com/g8/new01.jpg
http://mystudios.com/g8/new02.jpg
http://mystudios.com/g8/new03.jpg
#2
8 Second Club
iTrader: (13)
Nice, solid 40whp gain! What did you change besides the intake manifold and possibly the MAF housing it looks like? Why stop at 6500 if it was still making power? Looks like yours breaths better up top with the intake manifold, same thing mine did.
Uncorrected usually shows slightly higher numbers then SAE but as long as both sets of numbers are the same correction it'll show your gains just fine.
Uncorrected usually shows slightly higher numbers then SAE but as long as both sets of numbers are the same correction it'll show your gains just fine.
#3
11 Second Club
iTrader: (2)
Join Date: May 2009
Location: Oxford,Pa
Posts: 457
Likes: 0
Received 0 Likes
on
0 Posts
Nice, solid 40whp gain! What did you change besides the intake manifold and possibly the MAF housing it looks like? Why stop at 6500 if it was still making power? Looks like yours breaths better up top with the intake manifold, same thing mine did.
Uncorrected usually shows slightly higher numbers then SAE but as long as both sets of numbers are the same correction it'll show your gains just fine.
Uncorrected usually shows slightly higher numbers then SAE but as long as both sets of numbers are the same correction it'll show your gains just fine.
#6
11 Second Club
Thread Starter
Join Date: Mar 2009
Location: MD
Posts: 205
Likes: 0
Received 0 Likes
on
0 Posts
Nice, solid 40whp gain! What did you change besides the intake manifold and possibly the MAF housing it looks like? Why stop at 6500 if it was still making power? Looks like yours breaths better up top with the intake manifold, same thing mine did.
Uncorrected usually shows slightly higher numbers then SAE but as long as both sets of numbers are the same correction it'll show your gains just fine.
Uncorrected usually shows slightly higher numbers then SAE but as long as both sets of numbers are the same correction it'll show your gains just fine.
intake install.
#7
11 Second Club
Thread Starter
Join Date: Mar 2009
Location: MD
Posts: 205
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
8 Second Club
iTrader: (13)
Bigger headers and FAST manifold are solid moves for improving airflow up top, same thing I saw when doing those mods. Stock manifold was choking me up top.
Curious as to why you didnt just get the heads you had ported? I guess less down time and you can just sell them.
Curious as to why you didnt just get the heads you had ported? I guess less down time and you can just sell them.
#9
11 Second Club
iTrader: (2)
Join Date: May 2009
Location: Oxford,Pa
Posts: 457
Likes: 0
Received 0 Likes
on
0 Posts
Bigger headers and FAST manifold are solid moves for improving airflow up top, same thing I saw when doing those mods. Stock manifold was choking me up top.
Curious as to why you didnt just get the heads you had ported? I guess less down time and you can just sell them.
Curious as to why you didnt just get the heads you had ported? I guess less down time and you can just sell them.
#15
11 Second Club
Thread Starter
Join Date: Mar 2009
Location: MD
Posts: 205
Likes: 0
Received 0 Likes
on
0 Posts
#16
11 Second Club
Thread Starter
Join Date: Mar 2009
Location: MD
Posts: 205
Likes: 0
Received 0 Likes
on
0 Posts
From the Livernois web site:
cost $2200
Intake Flow Rate 360 CFM
Exhaust Flow Rate 245 CFM
Greg Good -- not home but I believe these are the numbers
cost almost free
Intake Flow Rate 365 CFM
Exhaust Flow Rate 235 CFM