Suspension & Brakes Springs | Shocks | Handling | Rotors

HELP. My front brakes don't work

Thread Tools
 
Search this Thread
 
Old 06-13-2011, 07:55 AM
  #1  
TECH Resident
Thread Starter
iTrader: (5)
 
1gt2nv's Avatar
 
Join Date: Jan 2009
Location: Wausau, WI
Posts: 970
Likes: 0
Received 0 Likes on 0 Posts

Default HELP. My front brakes don't work

I put on new pads and rotors. Now my front brakes don't work. I put about 500 miles on the new brakes. You can see on the rear rotors where the pads make contact. But the fronts have no marks at all. I can touch the fronts after driving and they are cold.
Old 06-13-2011, 08:00 AM
  #2  
TECH Resident
Thread Starter
iTrader: (5)
 
1gt2nv's Avatar
 
Join Date: Jan 2009
Location: Wausau, WI
Posts: 970
Likes: 0
Received 0 Likes on 0 Posts

Default

I did bleed them. But maybe there is still air in there.
Old 06-13-2011, 10:09 AM
  #3  
12 Second Club
iTrader: (3)
 
spy2520's Avatar
 
Join Date: Feb 2005
Location: Waldorf, MD
Posts: 3,513
Received 0 Likes on 0 Posts

Default

How does the pedal feel?
Old 06-13-2011, 10:22 AM
  #4  
TECH Resident
Thread Starter
iTrader: (5)
 
1gt2nv's Avatar
 
Join Date: Jan 2009
Location: Wausau, WI
Posts: 970
Likes: 0
Received 0 Likes on 0 Posts

Default

Originally Posted by spy2520
How does the pedal feel?
Just fine. Unless you keep your foot on it n push hard. Then it will slowly go to the floor.
Old 06-13-2011, 10:45 AM
  #5  
On The Tree
iTrader: (2)
 
bb5401000's Avatar
 
Join Date: Jul 2008
Posts: 181
Likes: 0
Received 0 Likes on 0 Posts

Default

Sounds like the calipers are frozen. That is weird. Pull the calipers off and have someone slowly press the brake pedal down and see if the pistons come out. I've been a mechanic for over 13 years and have never heard of this problem after a brake job.
Old 06-13-2011, 10:50 AM
  #6  
TECH Resident
Thread Starter
iTrader: (5)
 
1gt2nv's Avatar
 
Join Date: Jan 2009
Location: Wausau, WI
Posts: 970
Likes: 0
Received 0 Likes on 0 Posts

Default

Originally Posted by bb5401000
Sounds like the calipers are frozen. That is weird. Pull the calipers off and have someone slowly press the brake pedal down and see if the pistons come out. I've been a mechanic for over 13 years and have never heard of this problem after a brake job.
Ya, this is a first for me to. Never seen this before with all the brake jobs I've done. Would be very weird if they both are frozen at the same time. But you never know.
Old 06-13-2011, 10:54 AM
  #7  
On The Tree
iTrader: (2)
 
bb5401000's Avatar
 
Join Date: Jul 2008
Posts: 181
Likes: 0
Received 0 Likes on 0 Posts

Default

There could also be a hydraulic problem for the front circuit. The pedal slowly going to the floor when standing on it may point to the master cylinder.



Quick Reply: HELP. My front brakes don't work



All times are GMT -5. The time now is 11:02 PM.