I put on new pads and rotors. Now my front brakes don't work. I put about 500 miles on the new brakes. You can see on the rear rotors where the pads make contact. But the fronts have no marks at all. I can touch the fronts after driving and they are cold.

 

I did bleed them. But maybe there is still air in there.

 

How does the pedal feel?

 

Just fine. Unless you keep your foot on it n push hard. Then it will slowly go to the floor.

 

Sounds like the calipers are frozen. That is weird. Pull the calipers off and have someone slowly press the brake pedal down and see if the pistons come out. I've been a mechanic for over 13 years and have never heard of this problem after a brake job.

 

Ya, this is a first for me to. Never seen this before with all the brake jobs I've done. Would be very weird if they both are frozen at the same time. But you never know.

 

There could also be a hydraulic problem for the front circuit. The pedal slowly going to the floor when standing on it may point to the master cylinder.