blocc monster

I have a 2001 ws6 with a forged 347, ported 799 heads milled .20 , cam specs are 234 240 @.50 629 629 112+4. 4l60e 4000 ptc, 373 gears 96mm typhoon intake, sd tune, pace setter headers and y pipe with a magnaflow exhaust.
Dyno on a dynojet today and made 423hp and 365 tq. Why is torque so low?

itsslow98

iTrader: (18)

Whats the curve look like?

blocc monster

dnt no how to post my sheet im on a cell phne lol. y would it b so low though?

racerfox

iTrader: (4)

bad headers or exhaust ?

blocc monster

pacesetters and y pipe? i only gained 3hp wit my cutout open!

blocc monster

is that the only things it could b?

2002silverz28matt

I dont think your torque is low at all, that stall kills dyno numbers. I had a very similar setup to urs, 346, ported 243's stock ls6 intake, 235/243 cam, 4000 stall 390 gears, 4l60e sd tune, headers/exhaust and I made 416hp/375 torque. basically the same stuff as you expect you have a bigger intake which will make more power up to and loose a little torque down low.

blocc monster

wat did ur car run at the track silverz28matt?