Lxtasy1

iTrader: (4)

Everything is straight forward but I have another issue I ran into.There is a sensor on back of the intake that I thought I had removed, well guess I didnt because when I pulled the intke out, the wires pulled out of the plug in on the sensor.Does anyone know the positioning of these wires? There are 3 there, I can get colors if needed.

Thanks,
Chris

Lxtasy1

iTrader: (4)

I figured out that it is the MAP sensor, but what position do the wires go? I have Black, Green and Grey.

Thanks,
Chris

Lxtasy1

iTrader: (4)

Green goes in the middle, that is obvious from the diagram I found, but does the black go on the left or right looking at the snap side of the plug?

Thanks,
Chris

Lxtasy1

iTrader: (4)

Got it figured out.Just ordered the plug.