Dyno results with SLP 1.85 rockers
#1
10 Second Club
Thread Starter
iTrader: (3)
Join Date: Nov 2001
Location: Memphis, TN.
Posts: 384
Likes: 0
Received 0 Likes
on
0 Posts
Dyno results with SLP 1.85 rockers
2000 M6 with SLP Headers, MAF ends, SLT 2OTL Exhaust, ASP Power Pulleys, 3.42 gears
Dyno with mods listed above:
336.9 horsepower 348.9 torque.
Dyno after 1.85 rockers, LS6 intake, Ported Throttle Body, 4.11 gears
349.4 horsepower 352.6 torque.
<img src="http://prod.bsis.bellsouth.net/coDataImages/p/Groups/109/109430/folders/62568/396386dyno3103.gif" alt=" - " />
<small>[ March 03, 2003, 07:52 AM: Message edited by: BudH ]</small>
Dyno with mods listed above:
336.9 horsepower 348.9 torque.
Dyno after 1.85 rockers, LS6 intake, Ported Throttle Body, 4.11 gears
349.4 horsepower 352.6 torque.
<img src="http://prod.bsis.bellsouth.net/coDataImages/p/Groups/109/109430/folders/62568/396386dyno3103.gif" alt=" - " />
<small>[ March 03, 2003, 07:52 AM: Message edited by: BudH ]</small>
#2
Re: Dyno results with SLP 1.85 rockers
Interesting results, although I dont think most would choose to go that way because it limits your choice of cams, which is where people are getting a lot of power.
#3
Moderator
iTrader: (13)
Re: Dyno results with SLP 1.85 rockers
well i was hoping that the dyno run would have been made with only the rockers being changed cuz it looks like you got nothing from them
i think your gains were from the intake and ported tb <img border="0" title="" alt="[Frown]" src="gr_sad.gif" />
i think your gains were from the intake and ported tb <img border="0" title="" alt="[Frown]" src="gr_sad.gif" />