Dynamometer Results & Comparisons - Low numbers on dynojet
11-20-2011, 12:04 PM
Hey guys I took my 00 ws6 to the dyno yesterday and made 2 pulls I only made 308hp and 348tq with mid length headers ory borla catback and a lid my car is a 2000 ws6 m6 runs great feels really strong just seems a little low to me
11-20-2011, 12:16 PM
it all depends on what it dyno'd before the mods it also depends on the tune. Get long tubes, pulley, replace the ls1 intake with at least a ls6 intake unless you are planning on some internal mods later... if so get a fast intake, 3" Y pipe from the headers to the borla, and youll see decent bolt on results.
or you can get about the same or more from adding a 224ish cam pkg, and injectors to what you have. Either will require a tune.
Your torque number is nice and you said it feels good so thats the MAIN objective...:)
11-20-2011, 04:15 PM
Intake is coming very soon. I know I'm leaving some power on the table with the stock intake. Hopefully cam and heads by summer time.
11-20-2011, 04:27 PM
Good torque though.
It depends on the dyno. Mine did almost 340rwh on one dyno then the next 326rwh so who knows.
When my car only had lid, and borla catback, it did 320rwh on one dyno and the next did 315rwh.
The real test is the track :D
11-20-2011, 05:04 PM
Trap speeds don't lie.
11-20-2011, 05:09 PM
Yeah I can't wait to put it in the track and get some numbers
vBulletin® v3.7.4, Copyright ©2000-2014, Jelsoft Enterprises Ltd.