LM7 with LS6 cam HELP!!!!
#1
Teching In
Thread Starter
Join Date: Jan 2012
Location: Central,Louisiana
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
LM7 with LS6 cam HELP!!!!
I'm wanting to put this cam in my stock 05 lm7 truck. What my question is, what all will have to change? after reading some forums... I see that I need to change the springs, which I plan on using the LS6 stock springs. Do I need to change the pushrods? if so, to what length? Any and all help is appreciated. thank you.
#4
Teching In
Join Date: Nov 2009
Location: Strathmore Alberta
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
I don't mean to hi jack, but also interested on this as im building an 02 5.3 with the 02-04 LS6 cam already installed...but im having my 862's milled (dont have them back from machine shop yet to find out how much) How much milling takes into effect of the pushrod length, is it basically equal, minus milled thickness from pushrod length?