1toofastlt1

iTrader: (4)

Hey everyone Im about to replace my vortech v1 with a v7 ysi but I noticed when I took the V7 YSI apart to rebuild it to didnt have the spring/wave washers. Do the V7 ysi run those? Below I posted some pictures of the spring washers Im looking for. Thanks

1toofastlt1

iTrader: (4)

Doing some more research I found I do need the spring washers. Does anyone know the size and where to get them?

eb02z06

iTrader: (18)

Check Mcmaster carr

1toofastlt1

iTrader: (4)

I see them on there. Do you know witch ones? Thanks for the input

eb02z06

iTrader: (18)

Just have to measure yours and check. Careful on the thickness.

stevieturbo

Mine certainly had them when I had it apart. Although TBH they are so flimsy I dont see them doing much to retain any preload on the bearings.

1toofastlt1

iTrader: (4)

Ok I will get them from mcmaster Carr. I also need the high speed shaft seal. The intake side of the blower. Any one know the part number or size? If not I will measure and order from mcmaster Carr also

eb02z06

iTrader: (18)

Do you mean the seal behind the impellar?

1toofastlt1

iTrader: (4)

Yeah that's the one.

eb02z06

iTrader: (18)

I think it's a SKF part # 562929.

Don't quote me 100% on this though. You might want to contact Supercharger Rebuilds and they'll sell you just the seal. It might be different for the various head units.

1toofastlt1

iTrader: (4)

Awesome. Thanks for the help.