Rewiring a DBW harness..
#1
Rewiring a DBW harness..
NE1 found a way to rewire a truck TAC and foot pedal to work with the Vette throttle body??
I am looking to use an 05 truck pedal/TAC with an 03 Vette t/b. [The Vette TAC modules have been discontinued by GM.]
Any help is appreciated!
I am looking to use an 05 truck pedal/TAC with an 03 Vette t/b. [The Vette TAC modules have been discontinued by GM.]
Any help is appreciated!
#3
Thanks! We have the schematics, and are looking at the values....We have done scans on the resistors and looked at their hi/lo wiring positions. Nothing concluded as to what we may/may not change to get this to work....
We are now looking at the other input[s] to the pcm, that may be needed for it to work..
More later.........
We are now looking at the other input[s] to the pcm, that may be needed for it to work..
More later.........
#5
Staging Lane
iTrader: (2)
Join Date: May 2010
Location: mass
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
vette tb
Im using an 04 truck pedal to control a 05 vette ls2 using a tac box from speartech, but the guy that set it up on the dyno had to do some programming to make it work, hope this helps.