Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

F13 cam swap

Thread Tools
 
Search this Thread
 
Old 03-31-2012, 05:52 PM
  #1  
11 Second Club
Thread Starter
iTrader: (5)
 
njmaster's Avatar
 
Join Date: Oct 2011
Location: Raleigh, NC
Posts: 180
Likes: 0
Received 0 Likes on 0 Posts
Default F13 cam swap

I am going to order the F13 cam and i will be getting a cam kit. Futral offers two different beehive springs to choose from, manleys and comps 26918. They are both only rated a .600 lift. The F13 is just under this, but is it cutting it too close??
Old 03-31-2012, 05:57 PM
  #2  
Launching!
iTrader: (19)
 
no1izspeshl's Avatar
 
Join Date: May 2008
Posts: 208
Likes: 0
Received 0 Likes on 0 Posts
Default

It'd be cutting it close. I had the same cam on a 112 lsa. no complaints here. I used pp gold dual springs
Old 03-31-2012, 08:26 PM
  #3  
10 Second Club
iTrader: (14)
 
Detoxx03's Avatar
 
Join Date: Jan 2007
Location: Woodward Avenue
Posts: 7,336
Received 72 Likes on 37 Posts

Default

Originally Posted by njmaster
I am going to order the F13 cam and i will be getting a cam kit. Futral offers two different beehive springs to choose from, manleys and comps 26918. They are both only rated a .600 lift. The F13 is just under this, but is it cutting it too close??
Call and tell Charley you want that cam with dual springs and he will fix you right up just say you spoke with Detoxx.




All times are GMT -5. The time now is 06:31 AM.