Wheels & Tires - New Wheels Installed... MiRo 111

Hyper Silver w/ Machined Face MiRo 111 18x9.5 +40 275/35R18

http://i67.photobucket.com/albums/h284/ZROCWS6/TA41012.jpg

http://i67.photobucket.com/albums/h284/ZROCWS6/TA241012.jpg

http://i67.photobucket.com/albums/h284/ZROCWS6/TA341012.jpg

http://i67.photobucket.com/albums/h284/ZROCWS6/TA441012.jpg

They look pretty good!

Very nice. like it.

hell yeah, very clean looking wheel

if you dont mind me asking could you email me a price you paid,only if you bought them new because i love to have a set and make them black

Ill trade you my TT2s for them.. haha.. Im gonna have to do a set in black... the look soooo sick. Never seen the hyper silver on the TA... nicely done

Thanks for the compliments everyone.

They were just under $900 for the set. The vendor is not a sponsor here as far as I know. And they come in an all flat black finish.

Not bad. Now lower that sumbitch!!!

A black center and gold lip would look nice....( Hint at a photoshop)

Im don't usually like wheels without a lip but those are sweet.

Not bad. Now lower that sumbitch!!!

i agree !! an eibach pro kit would really set it off !! nice wheels :)

Those wheels look killer! Good choice! :thumb:

Thanks for the compliments everyone.

They were just under $900 for the set. The vendor is not a sponsor here as far as I know. And they come in an all flat black finish.


900 wheels and tires?

^^^^ highly doubt it.

I usually don't like silver wheels.......but, these look good. And at certain angles they have the old Pontiac snowflake resemblance going on, I think anyway.

Good looking wheel. I haven't seen them before!

Looks nice. Lower that pig and it will be perfect..

They look sweet on your TA. I really like the concave wheel designs.

Hey those are pretty cool! Nice to see something different for a change.

cant beat silver and black imo

looking good man

Damn that looks good!

Can you please pm me the website you purchased them from? The look great

:drool:

:Dvery nice:D

Look up Miro 111 im buying mine on this site http://www.elementwheels.com/products.asp?cat=3383

Fell in love with them when i first seen it on this TA

http://i1188.photobucket.com/albums/z401/mosalaam/394425706.jpg
http://i1188.photobucket.com/albums/z401/mosalaam/394425699-1.jpg

Oh, also beware of the offsets, our cars arent rly meant to go lower than a 34mm offset.
You also might wanna get a hubcentric ring since the bolt pattern on these are meant to fit a BMW (5x120mm) and the f bodys are 5x120.7

http://www.elementwheels.com/proddetail.asp?prod=miro-9351895hs

Thats where I got mine as well. That is a link to the ones I ordered. Didn't post before because they are not a sponsor here as far as I know. But as this is a wheel thats outside F-Body specifics you would see come to this site there it is.

Get the 5x120 +40 and you will be fine. The 5x120 bolt pattern works just fine on 4th gens.

You will need a hub centric rings with an inside diameter of 70.3 and an outside diameter of 72.6. This allows the wheel to sit on the hub of the axle which will hold all the weight instead of just on the lug studs them selves. With out them the studs can break and you will also get a vibration due to the wheel not staying centered. Times that by 4 uncentered wheels and its not fun.

Thanks for all the compliments everyone!

Looks amazing man!!!! I can't wait to get a set one of these days. Wanna trade for some speedlines lol?

http://www.elementwheels.com/proddetail.asp?prod=miro-9351895hs

Thats where I got mine as well. That is a link to the ones I ordered. Didn't post before because they are not a sponsor here as far as I know. But as this is a wheel thats outside F-Body specifics you would see come to this site there it is.

Get the 5x120 +40 and you will be fine. The 5x120 bolt pattern works just fine on 4th gens.

You will need a hub centric rings with an inside diameter of 70.3 and an outside diameter of 72.6. This allows the wheel to sit on the hub of the axle which will hold all the weight and just on the lug studs them selves. With out them the studs can break and you will also get a vibration due to the wheel not staying centered. Times that by 4 uncentered wheels and its not fun.

Thanks for all the compliments everyone!

Where did you find the hub centric rings??

A local shop that does nothing but wheels and tires. There is a site that I will be ordering a set of spacers for the rear from. The only reason I need the spacers is that the center cap on the rear wheels is being pushed out of the wheel by the hub on the axle. I asked Qcon if he was having this problem and he is not. No other fitment problems at all with these wheels.

http://www.motorsport-tech.com/

A local shop that does nothing but wheels and tires. There is a site that I will be ordering a set of spacers for the rear from. The only reason I need the spacers is that the center cap on the rear wheels is being pushed out of the wheel by the hub on the axle. I asked Qcon if he was having this problem and he is not. No other fitment problems at all with these wheels.

http://www.motorsport-tech.com/

Thanks man, i was looking up spacers amd found this

http://www.motorsport-tech.com/4DCGI/s_yearmakemodel.html

Should i pick the Hub Centric to Vehicle and Wheel Centric to Wheel Spacer? It seems like it has a hub centric ring already on it.. Or will it not fit the MiRo rims?

Hub centric to vehicle AND wheel yes. They will fit the vehicle hub and be machined to fit the wheel bore. Its a spacer and hub ring in one.

they have the giovanna kilis wheels in black that almost look just like these

Looks good op! camera doesn't do it justice imo, the pics are a tad grainy

Looks good! I was wondering how'd they look in silver.

I'm glad I finally found wheels I like.

http://www.qconcepts.org/photos/i-MFjkHqX/0/L/i-MFjkHqX-L.jpg

http://www.qconcepts.org/photos/i-DB7FBvg/0/L/i-DB7FBvg-L.jpg

Very clean, kudos

Looks good! I was wondering how'd they look in silver.

I'm glad I finally found wheels I like.



Thanks! Thank you for finding them! I have been wanting to get wheels for a while but could never decide.

I need to take some more pictures to show off the machined face better.

Where in IL are you located? Great looking wheels.

Where in IL are you located? Great looking wheels.

Peoria area

Very nice OP. Ive never seen them in anything but black, very glad you didnt go with black!

Peoria area

Do you ever head down to Bloomington/Normal for the Twin City Cruisers cruise nights?

Nice wheels. Again, another wheel I wish came in a wider option than 9.5". I really want to find an 18" wheel that come in 10-11" widths that's not $700+ each.

Nice wheels. Again, another wheel I wish came in a wider option than 9.5". I really want to find an 18" wheel that come in 10-11" widths that's not $700+ each.

Forgestars or OEwheels..

Good looking wheel. I haven't seen them before!

same here..

I usually don't like silver wheels.......but, these look good. And at certain angles they have the old Pontiac snowflake resemblance going on, I think anyway.


I was thinking the exact same thing. I like em'

Re hosted pics in OP since they went down for some reason.

Here is a pic I took today after cleaning the car up and putting the wheels back on for the summer.

http://i67.photobucket.com/albums/h284/ZROCWS6/976562_10151601816822420_371798630_o.jpg

Very nice, I like those, killer!

Besides yours and the flat black, do they come in ANY other colors, i.e.; gun metal, graphite, competition grey, etc.??

Has Anyone seen these on a camaro? they look awesome on the T/A