Lets cruise to PIR this saturday
#1
Teching In
Thread Starter
iTrader: (4)
Join Date: Jul 2009
Location: Brush prairie,wa
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Lets cruise to PIR this saturday
I was thinking we should set up a lil cruise to the track this coming saturday cause the weather is looking to be super nice. So who's down to go?
Trending Topics
#16
Teching In
Thread Starter
iTrader: (4)
Join Date: Jul 2009
Location: Brush prairie,wa
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Well if my car holds up and i dont break it i hope to get booted off the track. Im going to try launch at 4,500 rpm and hope everything holds. So i think i should be able to get a 11.4 if i can cut a 1.6 60ft. And hope to trap 124
#20
TECH Apprentice
iTrader: (11)
Join Date: Nov 2008
Location: Federal Way, Wa
Posts: 381
Likes: 0
Received 0 Likes
on
0 Posts
Going to be in the Puyallup area most likely. But may do Kent or even Federal Way. Not 100% on that yet.
TSP 402 short block 11.1:1
Eagle Crank/Rods/Diamond -15cc pistons/ARP everything
RPM small bore CNC LS7 heads. 60cc
RPM Ported LS7 Intake/ 96mm NW Throttle body
236-248 .648/651 114lsa
ARH 1 7/8 headers no cats.
powerbond ud pulley
diamond stage 2 clutch/ Light flywheel
ls7 rail/injectors
ls7 rockers trunion upgrade
Halltech air intake
Evans Water pump
TSP 402 short block 11.1:1
Eagle Crank/Rods/Diamond -15cc pistons/ARP everything
RPM small bore CNC LS7 heads. 60cc
RPM Ported LS7 Intake/ 96mm NW Throttle body
236-248 .648/651 114lsa
ARH 1 7/8 headers no cats.
powerbond ud pulley
diamond stage 2 clutch/ Light flywheel
ls7 rail/injectors
ls7 rockers trunion upgrade
Halltech air intake
Evans Water pump