Vehicle Classifieds - 1993 Mazda R1 2010 camaro LS3 21kupdated pics

Have a 1993 Mazda rx7 with a 2010 camaro ls3(engine has less than 20miles on it). Call me at 301-518-2362
Parts:

Body:
Shineauto Burnout rear fenders
Shineauto Burnout front fenders
Cwest front bumper
99spec Turn signals
Shineauto Feed carbon fiber sideskirts
Feed replica carbon rear wing

Wheels: Sport max 9.5x18 front wrapped in Bfgoodrich geforce TA 235/40/18(NEW
Sport Max 11x18 rear wrapped in BFgoodrich Geforce TA 275/35/18(new)

Brakes/suspension:
H/R Lowering Springs(should be replaced)
Brembo Front Rotors
OEM rear rotors
Hawk Pads all around
Improved racing to links/trailing arms

Interior:
Hinson offset shift arm
Pro 5.0 shifter
Norotors shifter hole cover
Aeroforce interceptor gaugesx2
Pioneer Headunit
Pioneer speakers(fronts and rear
Redline goods ebrake/shifter boot/ebrak handle cover and center console cover
Floormats stitched with "LS3 Rx7" black with grey stitching

Engine:
2010 Camaro 6.2 liter v8 with less than 16 miles(new)
2002 Firebird t56 with 4k miles
JTR 1 7/8 ceramic coated headers
Dual 3inch Stainless steel exhaust with X-Pipe going to single magnaflow dual tip muffler(straight pipes)
GMPP Ls3 engine controller kit
GMPP cadillac ctsv front drive accessories with a/c mounted but not installed
New master cyllinder/slave cyllinder(I forget brand, but its the one we all use)
2010 z06 clutch/flywheel/pressure plate
z06 fuel system
Aeromotive FPR
Supra fuel pump
Hinson radiator kit
Tick remote bleeder

(I'm sure I'm missing a couple things)(Just about everything mechanical on this car was bought brand new).


I'm sure I'm missing something, but the car needs just a little bit more work to be put into it so it is 100percent. The interior is honestly about a 6 or 7 10. Asking 19k. Please CALL me at 301-518-2362 if interested. I'm bad at text messages and e-mails.

Things that need to be done to the car after a long lookover:

New diff bushing
Harness under driver side fender well tucked
AC system installed(condenser mounted/compressor mounted)
Gauge/AC cluster lights(I probably just didnt connect a harness, I don't know)
New Blower motor(a/c/heat)
Interior needs some TLC, but the engine has 16 miles on it, trans is 4kish.

http://i26.photobucket.com/albums/c147/Tenacious772/rx7fullbody.jpg
http://i26.photobucket.com/albums/c147/Tenacious772/2011-02-24_16-30-00_513.jpg


http://i26.photobucket.com/albums/c147/Tenacious772/rx7build1.jpg
http://i26.photobucket.com/albums/c147/Tenacious772/rx7ls3.jpg
http://i26.photobucket.com/albums/c147/Tenacious772/rx71.jpg
http://i26.photobucket.com/albums/c147/Tenacious772/rx7enginebay1.jpg
http://i26.photobucket.com/albums/c147/Tenacious772/rx7enginebay1-1.jpg
http://i26.photobucket.com/albums/c147/Tenacious772/rx7enginebay3.jpg
http://i26.photobucket.com/albums/c147/Tenacious772/rx7enginebay4.jpg
http://i26.photobucket.com/albums/c147/Tenacious772/rx7enginebay2.jpg
http://i26.photobucket.com/albums/c147/Tenacious772/rx7interior1.jpg
http://i26.photobucket.com/albums/c147/Tenacious772/rx7interior2.jpg
http://i26.photobucket.com/albums/c147/Tenacious772/rx7interior3.jpg
http://i26.photobucket.com/albums/c147/Tenacious772/rx7interior4.jpg
http://i26.photobucket.com/albums/c147/Tenacious772/rx7interior5.jpg
http://i26.photobucket.com/albums/c147/Tenacious772/rx7interior6.jpg
Call AT 301-518-2362 NAME IS DOUG

~bump

damn very nicee

would love to have a lsx rx7...
glws! nice taste!

I saw you mentioned you have the GMPP Ls3 engine controller kit. Can you use HPtuners with that or will I have to get a new ECU?

Thank you for the compliments! She's definitely a beauty, and a lot of hard work put into her. I just feel its time to pass the torch!
I saw you mentioned you have the GMPP Ls3 engine controller kit. Can you use HPtuners with that or will I have to get a new ECU?

The gmpp LS3 controller kit is basically a crate engine setup, I believe the ecu is the same in the 2010 base vette. Also tuned to that of a base model vette. The engine is completely stock, except for the fuel system.

I apologize, I'm not familiar with HPtuners.

Either way this vehicle is a steal at 19k. Feel free to call for any additional questions, I'm available anytime. 301-518-2362 @Doug

Still for sale!~

Looks sick! I'll be in the market in about 4-5 months. Good luck though!

any trades??

06 GTO M6, 47k??

I'd prefer an outright sale, 21k for this car is a steal!

that is understandable. and it is a hell of a deal.

ill work on my end, maybe we can work something out.

Sounds good! Feel free to give me a call!

Still for sale!

Free bump. Beautiful car and well worth the $.