402 stroker crank with stock ls2 rods and pistons?
#1
402 stroker crank with stock ls2 rods and pistons?
I just picked up a eagle 402 crank and was wandering if anyone has used one with stock rods and pistons? Any info or advice would be greatly appreciated
#4
I haven't heard too many good things about Eagle LS cranks. FWIW
#6
LS1Tech Premium Sponsor
iTrader: (5)
If you want a forged crank for the stock rods and pistons (which really doesn't make any sense to me), you could get the stock stroke crank made by Callies, Eagle, K1, and likely several others. I'd have to ask "Why?" though!
__________________
Largest Stocking Distributor of LS-x Engines / CHECK OUT OUR NEW WEBSITE!
COMP - FAST - PACESETTER - DIAMOND RACING - EAGLE SPECIALTY PRODUCTS - CALLIES - COMETIC GASKETS
RAM CLUTCHES - MOSER ENGINEERING - KOOK'S HEADERS - ARP - GM BOLTS AND GASKETS - MSD - NGK
POWERBOND - ASP - AND MORE!
Largest Stocking Distributor of LS-x Engines / CHECK OUT OUR NEW WEBSITE!
COMP - FAST - PACESETTER - DIAMOND RACING - EAGLE SPECIALTY PRODUCTS - CALLIES - COMETIC GASKETS
RAM CLUTCHES - MOSER ENGINEERING - KOOK'S HEADERS - ARP - GM BOLTS AND GASKETS - MSD - NGK
POWERBOND - ASP - AND MORE!
#7
TECH Apprentice
iTrader: (7)
Originally Posted by Matt@Texas-Speed
If you want a forged crank for the stock rods and pistons (which really doesn't make any sense to me), you could get the stock stroke crank made by Callies, Eagle, K1, and likely several others. I'd have to ask "Why?" though!
Posted from LS1Tech.com App for Android
Trending Topics
#9
11 Second Club
iTrader: (6)
Join Date: Feb 2005
Location: middle of nowhere, Kansas
Posts: 1,309
Likes: 0
Received 2 Likes
on
2 Posts
The piston pin location is different for individual strokes. so you have to match up the piston for the right rod length and crank stroke. If you absolutely want to use the stock pistons and rods, then you need to use the stock stroke crank. Yes, they make forged 3.622" cranks. But, why would you get a forged crank when the weak link is the pistons. I'd rather get forged pistons and run the stock crank.
#10
TECH Apprentice
iTrader: (7)
Originally Posted by batboy
The piston pin location is different for individual strokes. so you have to match up the piston for the right rod length and crank stroke. If you absolutely want to use the stock pistons and rods, then you need to use the stock stroke crank. Yes, they make forged 3.622" cranks. But, why would you get a forged crank when the weak link is the pistons. I'd rather get forged pistons and run the stock crank.
Posted from LS1Tech.com App for Android