stock a4 camaro times 1/8th
#1
Teching In
Thread Starter
Join Date: Sep 2012
Location: sc
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
stock a4 camaro times 1/8th
Been looking around for a real stock camaro thread. Couldnt find any but when i did it was all 1/4 mile times. Just looking for 1/8th. Closes 1/4 is 3hours away, so thats a no go for now. I know everyone doesnt have a completely stock car. So few mods are ok. Like air lid, free mods, weight reduction etc... if you have more mods just list them with your et and mph. Thanks
Last edited by 98z28Quinn; 03-16-2013 at 10:54 PM.
#2
First time at the track. 98 A4 slp lid and ram air, loudmouth catback, full weight, 275/40 17s all season tires, August heat in south Carolina....8.72@83 2.06 60ft. Probly could've went 60s with a little more seat time. Now the car has Lt's ORY stall and cam
#5
Teching In
Thread Starter
Join Date: Sep 2012
Location: sc
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
#6
11 Second Club
iTrader: (5)
Join Date: Apr 2009
Location: South GA
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
Dynoed 307whp and 322Ftlbs in 90 degree heat
Ran 2.080 8.715@83.75 13.372@105.7 on street tires in 90 degree heat
SLP Lid, Zed Style Cutout, Descrened MAF, FRAM, !AIR, !EGR, TB Bypass, HP Tuners
Ran 1.992 8.542@84.74 in 70 degree heat, horrible track prep on drag radials
Ran 2.080 8.715@83.75 13.372@105.7 on street tires in 90 degree heat
SLP Lid, Zed Style Cutout, Descrened MAF, FRAM, !AIR, !EGR, TB Bypass, HP Tuners
Ran 1.992 8.542@84.74 in 70 degree heat, horrible track prep on drag radials
Trending Topics
#9
10 Second Club
iTrader: (41)
Boltons+stock stall...
https://ls1tech.com/forums/drag-raci...ed-12-6-a.html
Boltons+ss3600
https://ls1tech.com/forums/11-second...id-inside.html
Boltons+ss3600+h+c+i
https://ls1tech.com/forums/11-second...new-setup.html
https://ls1tech.com/forums/drag-raci...ed-12-6-a.html
Boltons+ss3600
https://ls1tech.com/forums/11-second...id-inside.html
Boltons+ss3600+h+c+i
https://ls1tech.com/forums/11-second...new-setup.html