Patriot Springs
#3
TECH Enthusiast
iTrader: (2)
Join Date: Nov 2003
Location: Dallas, TX
Posts: 621
Likes: 0
Received 0 Likes
on
0 Posts
I will be using them w/ my g5x-2 cam....have heard a lot of good things about them from other members. For $295 you get dual gold micro polished springs/tit retainers/harden seats/valve seals/new 7* angle retainer locks, known as the "super 7 locks"
They seem to be very similar to comp 921 or rev 1116
specs:
135lb/380lb
good up to .650 lift
They seem to be very similar to comp 921 or rev 1116
specs:
135lb/380lb
good up to .650 lift
#4
TECH Fanatic
Thread Starter
Join Date: Mar 2003
Location: Dallas
Posts: 1,112
Likes: 0
Received 0 Likes
on
0 Posts
Trying to decide whether I should just replace my Isky 295s (15k miles) with new ones or get these.
My heads are going in for some work so this is a good time to do it.
My heads are going in for some work so this is a good time to do it.
#5
LS1Tech Premium Sponsor
iTrader: (1)
Join Date: Nov 2001
Location: Lubbock, Texas
Posts: 381
Likes: 0
Received 0 Likes
on
0 Posts
We've run 629 on them I'll post pics of them with the super 7 locks, we sell the complete package for $295!!
__________________
01 NBM Z28- A4 w/3.23s, TSP Black Lid, Hooker Catback, Pacesetter Headers w/ORY, ASP Pulley, Ported Throttle Body, TSP Torq. v3(231/234) Camshaft, TCI 4400, PRC Stg 1 Heads
Texas Speed & Performance
www.texas-speed.com
(806) 866-0734
01 NBM Z28- A4 w/3.23s, TSP Black Lid, Hooker Catback, Pacesetter Headers w/ORY, ASP Pulley, Ported Throttle Body, TSP Torq. v3(231/234) Camshaft, TCI 4400, PRC Stg 1 Heads
Texas Speed & Performance
www.texas-speed.com
(806) 866-0734
#7
TECH Enthusiast
iTrader: (2)
Join Date: Nov 2003
Location: Dallas, TX
Posts: 621
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Brian @ Texas Speed & Performance
We've run 629 on them I'll post pics of them with the super 7 locks, we sell the complete package for $295!!
kyle@midstate-electronics.com
NOW BACK TO THE TOPIC....
Trending Topics
#8
11 Second Club
iTrader: (13)
Join Date: Jun 2002
Location: The Confederacy
Posts: 3,063
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Magred2001vette
Brian, this is way off topic, but can you email me a dyno overlay graph between TSP231/237 & stock of cam only car...thinking of switching to this cam and also using my PP dual springs.
kyle@midstate-electronics.com
NOW BACK TO THE TOPIC....
kyle@midstate-electronics.com
NOW BACK TO THE TOPIC....
#13
Originally Posted by Brian @ Texas Speed & Performance
We've run 629 on them I'll post pics of them with the super 7 locks, we sell the complete package for $295!!
Hey Brian,
I did not get to put my cam in yet, and when I got the Patroit springs and cam from you before the new super locks were out.... are these needed, I would think so...
can I get them now..
#14
TECH Fanatic
Originally Posted by Mark IXZD 150
I have the old (not gold) patriot dual springs but haven't installed the heads yet. Anyone have any complaints on them?
Don't install the heads with those springs.I will swap them out for the "GOLD" duals.Email or pm me your info.Thanks, Terry