paintballcars

Category: Engine - Intake/Fuel
Price: $1500
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V
Location (State): MA
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6, Small Block
LS Engine?: Fits LS Engine

243 Casting LS2/LS6 heads. Heads were ported to stage 2 by Land Speed Development by Brett Land. Never installed! Brand new! PAC 1218 springs installed. (Will not remove, selling with springs installed).

Head specs:
- 5 Angle Race Valve Job on Intake Side

- Full Radiused Race Valve Job on Exhaust Side

- Deep Intake Bowl Porting

- Exhaust Port is Fully Ported

- Deck Surface Milled to Your Specifications

Stage 2 on 243 Heads 40 - 55 hp rwhp gain claimed by guy who ported the heads.

Additional info:
STAGE 2 PORTING OPTION, FULLY PORTED EXHAUST 97cc, DEEP INTAKE BOWL PORTING 215cc
5 ANGLE INTAKE VALVE JOB, FULL RADIUSED EXHAUST VALVE JOB.
LANDSPEED FLOW MODIFIED STOCK VALVES 2.00" // 1.550" MILLED TO 62.5cc (LS1COMPRESSION 10.8.1, LS2 COMPRESSION 11.3.1)
INTAKE PORT FLOWS 305cfnm, EXHAUST FLOWS 225 cfm
PAC #1218 SPRINGS, NEW STEM SEALS AND LOCATORS

SOLD

paintballcars

Any interest???

paintballcars

Price drop $1350+shipping

GrimReaper

iTrader: (33)

Free bump, Land is TOP NOTCH..... his heads always run real hard on the street and track. these would be real nice with a good camshaft

04goat350

iTrader: (1)

where in MA are you? I'm in Albany NY and what are the springs lift good to?

zeusrotty

iTrader: (1)

Do you know the flow rates?

paintballcars

Springs are PAC 1218 beehives, so I believe .600 but you may want to double check. I was told to run this set up with a 228 cam. I already sold the cam though. Brett from landspeed development is a great guy, whoever purchases these heads can just email him or call him up and ask him what he recommends going with.

Also, located about 10 miles south of Boston. Albany is about 4.5-5 hours away, I've driven there a few times.

paintballcars

.....

paintballcars

Thanks! Much appreciated. Brett is a great guy to work with. He also ported my LS2 intake manifold which sold the other day on here.

paintballcars

Heads SOLD!