FS: LS3 shortblock (13k miles)
#1
FS: LS3 shortblock (13k miles)
Category: Engine - Complete Motors
Price: $1800
Part Fits: 2010+ Camaro, 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V
Location (State): KS
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9
LS Engine?: Fits LS Engine
I'm building an iron 365ci motor w/ LSA heads, so this short block is for sale. I thought about reusing my LS3 heads on the new build, so I pulled them, but ended up not going that route, so they are removed and available in a separate thread as bare heads (https://ls1tech.com/forums/parts-cla...ngs-loose.html)
I've reused the covers, oil pump/pan, misc on the new motor, so what you see is what you get. It's just the core assembled short block from my 2009 coupe with 13k miles. The stock cam is included w/ the single bolt timing gear and chain/tensioner.
I'm also selling a 416ci rotating assembly I was going to use to build this before I went with the iron block 3.622" crank motor if anyone wants to build it. I'll make a deal if you buy both. (https://ls1tech.com/forums/parts-cla...o-pistons.html)
$1800 + shipping + paypal fees
Last edited by turbotuner20v; 02-12-2013 at 09:03 AM.
#3
Not unless someone wants the rotating assembly for $1,000
Also, here are the test results before the motor was pulled. Leakdown was done with either the piston at the top or bottom of the cylinder, not all at the top.
COLD compression test
1 - 190 psi
2 - 192 psi
3 - 195 psi
4 - 190 psi
5 - 195 psi
6 - 195 psi
7 - 190 psi
8 - 195 psi
COLD leak down test
1 - 13%
2 - 6%
3 - 9%
4 - 5%
5 - 6%
6 - 19%
7 - 6%
8 - 5%
Also, here are the test results before the motor was pulled. Leakdown was done with either the piston at the top or bottom of the cylinder, not all at the top.
COLD compression test
1 - 190 psi
2 - 192 psi
3 - 195 psi
4 - 190 psi
5 - 195 psi
6 - 195 psi
7 - 190 psi
8 - 195 psi
COLD leak down test
1 - 13%
2 - 6%
3 - 9%
4 - 5%
5 - 6%
6 - 19%
7 - 6%
8 - 5%
#5
EricYJ, track this dude down in Dallas..
http://dallas.craigslist.org/dal/pts/3462027771.html
turbotuner, what part of KS are you in?
http://dallas.craigslist.org/dal/pts/3462027771.html
turbotuner, what part of KS are you in?
If you were interested and wanted to come pick it up, I'd be willing to drop the price some for saving me the time and effort of shipping.
Trending Topics
#10
#12
#20
Is that the correct number? (408) 505 0805 ... 0?
ebay auction ends 3pm tomorrow, so this will be sold one way or another. I have up to 12hrs before the auction end time (3pm tomorrow) to close a deal outside ebay. So if anyone wants this, it has to get done today.
http://www.ebay.com/itm/LS3-engine-s...00b5bd&vxp=mtr
ebay auction ends 3pm tomorrow, so this will be sold one way or another. I have up to 12hrs before the auction end time (3pm tomorrow) to close a deal outside ebay. So if anyone wants this, it has to get done today.
http://www.ebay.com/itm/LS3-engine-s...00b5bd&vxp=mtr
Last edited by turbotuner20v; 01-17-2013 at 10:54 AM.