Need Help: TH400 to 4l60e
02-25-2013, 08:33 PM
#1
Registered User
Thread Starter
Join Date: Feb 2013
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Need Help: TH400 to 4l60e I have a 2000 f body with a TH400,pro yank 3800 10.5 billet stall & a cheetah scs reverse manual shifter in my car and I want to convert it to a built 4l60E. The car was originally a 6 speed. Any other things you guys can think of that i may need that i dont have listed below or any sugestions. I plan on selling my current setup.
built 4l60e
circle d stall
tci controller
crosmember
driveshaft
stock shifter
new console cover
built 4l60e
circle d stall
tci controller
crosmember
driveshaft
stock shifter
new console cover
03-02-2013, 09:33 AM
#4
Moderator
That is the exact Flexplate I have on my LS2 with 4L60E.
Personally I would skip the TCI controller and add the 4L60E wiring to the harness, but I am very comfortable with wiring. This would also require getting the 4L60E-segment software installed in the PCM.
Personally I would skip the TCI controller and add the 4L60E wiring to the harness, but I am very comfortable with wiring. This would also require getting the 4L60E-segment software installed in the PCM.