Opening a fast 78 to 85
07-31-2013, 07:42 PM
#1
Staging Lane
Thread Starter
iTrader: (9)
Join Date: Mar 2013
Location: TX
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
Opening a fast 78 to 85 Obvioulsy I know I can send my manifold to a professional shop like TSP, Tony, VR, and so on but is this something that say a local machine shop could do? Im about to do a head and cam install on my car and cant have it down for more than a weekend because its my DD. Thoughts?
08-01-2013, 08:44 AM
#2
They may or may not be able to do it without ruining it.
I would run it as is before I would let someone mess with it who you weren't sure about. There is a detailed thread on here somewhere about the procedure. If you have a steady hand and a dremel it's something you could probably do yourself at a later date.
I would run it as is before I would let someone mess with it who you weren't sure about. There is a detailed thread on here somewhere about the procedure. If you have a steady hand and a dremel it's something you could probably do yourself at a later date.
