Turboswede

iTrader: (1)

I Wonder if someone know what parts I need for 700-800rwhp on e85, the engine is a 5.3 lm7 with ls1 intake.

What injectors?
In or out tank pump?
How big lines?

Turboswede

iTrader: (1)

I think about

Delphi 120lb injectors
Aem 320l E85 pumps dual in-tank
10an fuel line and an8 return line

TT402LS1

iTrader: (5)

Could go 80lbs injectors
Dual pumps as you suggested
8an fuel line w/ 6an return

Run you base pressure a little high (around 68psi)

james97cobra

iTrader: (10)

Bosch 115 lb injectors
Magnafuel 4303 pump
8 feed/6return

Thats my set up and I have the same goals as you.

allout06

iTrader: (11)

im shooting for 1000rwhp on E85. and my setup im ordering friday is..

Twin Walbro 450lph In-tank
-8 feed/-6return
127lb FIC Bosch Injectors

DropShipDave

I would add a boost referenced regulator to the list too.

2muchboostNY

iTrader: (8)

And if I may suggest, some Stainless Steel Fuel Filter components. Just being around the imports and seeing some issues, for some reason or another some people have deteriorated the internals of paper type filters. One very reputable shop that I know uses 2 filters, one 100 micron filter and one 40 micron (or less) filter. At least up here in the NY we get some E85 based fuel which is dirty at times. Some of the guys have seen clogged filters and/or injectors rather quickly when switching over to E85. May be overkill but worth the extra $100 bucks or so in my opinion. My 2 cents.

Camaro9969

iTrader: (12)

With E85 always go bigger if you got the cash just buy some ID2000 injectors if not something over 120's will be ok. 160s are used a lot but i hear a bitch to tune with (I dont know personally but what i hear)