Mistakes you made
#1
Mistakes you made
Never used nitrous before, just received a plate system from Nitrous Outlet and starting to install it. What mistakes or lessons learned while starting out? What would you have done different? Basically have a lc1, lnc 2000 and a NOS mini to install and not in a big hurry to install.
#2
TECH Senior Member
iTrader: (2)
Join Date: Aug 2012
Location: Howell & Fenton MI
Posts: 11,145
Likes: 0
Received 16 Likes
on
16 Posts
I can't say that I really made any mistakes that I really regreted to much, I went the extra mile with a good custom tune, and all the proper accessories and whatnot, so I could enjoy it reliably and safety. The wiring was really the hardest part to me though
#3
wiring was the hardest part for me. One change I made that I wish I would of done in the beginning was wire in the WOT position wire into my PCM instead of using the micro switch on the TB.
Trending Topics
#9
TECH Veteran
iTrader: (11)
Mistakes: Not listening to the big guys here such as Shiz and ATV. They beat me up about on here awhile back when i showed the pics of the,motor and the aftermath.
Some of the other guys in here to listen to: carter01, firehawk441, camscam, shortdog, minytryker, and there are a few more here that i can't remember, but you will know when theypost up. There is no reason to burn a motor down with all the guys on here that can help you
Some of the other guys in here to listen to: carter01, firehawk441, camscam, shortdog, minytryker, and there are a few more here that i can't remember, but you will know when theypost up. There is no reason to burn a motor down with all the guys on here that can help you
#10
Lol I'm finishing up a turbo project now. Wiring clutch and a few sensors install and its done.
93 always