-8 and -6 fuel line -10, -8, -6 fittings, filter, Y block and misc parts
#1
Teching In
Thread Starter
iTrader: (9)
Join Date: Nov 2012
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
-8 and -6 fuel line -10, -8, -6 fittings, filter, Y block and misc parts
I am consolidating all of my old ads into one ad with some new parts.
-8 fuel line, enough to run an entire feed line with a mixture of braided and non braided line. All line has fittings on ends.
-6 fuel line, enough to run full return line with a mixture of stainless braid and non stainless braid. All line has fitting on ends
There are a bunch of pieces from one long piece of each and a bunch of shorter pieces with fittings on just about every end.
Also a ton of misc fittings including some -8 male to 3/8 npt, -10 to two -8 Y block from russel, one summit in line post fuel filter that is -10 in and out with fittings on both ends.
Also I can text pictures of it all or individual pieces. Sold..
Lt1 radiator with all hoses in perfect shape. Sold.
Lt1 heater hose setup in great shape. $25 bucks
97 SS front swaybar setup with all bushings and brand newend link bushings still Iin package. $35 bucks
97 SS rack and pinion with tie rods. Great shape. No leaks. $30 bucks
97 SS ram air intake. Not in perfect shape. Missing little metal clamps and has small hole in the bottom of tube. Can be sealed up but these are impossible to find. $75 bucks.
Fog lights off my 97 SS. Great shape and bulbs worked when pulled. $50 bucks.
Full bumper assembly off a 96 z28. Complete with impact support plastic and fog lights. One fog light is cracked but other is good. Bought to have an extra when I cut up mine for an intercooler. Didnt mess up do didn't need it. 50 bucks for the whole setup.
Like I said I can text pictures of anything at 6602336251
Thanks for looking.
-8 fuel line, enough to run an entire feed line with a mixture of braided and non braided line. All line has fittings on ends.
-6 fuel line, enough to run full return line with a mixture of stainless braid and non stainless braid. All line has fitting on ends
There are a bunch of pieces from one long piece of each and a bunch of shorter pieces with fittings on just about every end.
Also a ton of misc fittings including some -8 male to 3/8 npt, -10 to two -8 Y block from russel, one summit in line post fuel filter that is -10 in and out with fittings on both ends.
Also I can text pictures of it all or individual pieces. Sold..
Lt1 radiator with all hoses in perfect shape. Sold.
Lt1 heater hose setup in great shape. $25 bucks
97 SS front swaybar setup with all bushings and brand newend link bushings still Iin package. $35 bucks
97 SS rack and pinion with tie rods. Great shape. No leaks. $30 bucks
97 SS ram air intake. Not in perfect shape. Missing little metal clamps and has small hole in the bottom of tube. Can be sealed up but these are impossible to find. $75 bucks.
Fog lights off my 97 SS. Great shape and bulbs worked when pulled. $50 bucks.
Full bumper assembly off a 96 z28. Complete with impact support plastic and fog lights. One fog light is cracked but other is good. Bought to have an extra when I cut up mine for an intercooler. Didnt mess up do didn't need it. 50 bucks for the whole setup.
Like I said I can text pictures of anything at 6602336251
Thanks for looking.
Last edited by dennisgreener; 01-01-2014 at 01:05 PM.