Small bore ls3 heads.
#1
Small bore ls3 heads.
Alright I have a set of ls3 heads that are factory cast heads. That have had a smaller 2.08 intake valve installed. Therefore allowing these heads to work on an ls1 bore.
They have never Been ran I bought them this way and never used them. Decided to change directions.
They are complete and come with. 600 lift Pac Springs in them
$800 or best offer.
I may intertain trades for some cathedral port heads plus cash or equal value trade. Maybe even a factory head/intake combo.
Open to offers and I can send and take. More pictures if needed.
Contact @ Turbotyler@yahoo.com
They have never Been ran I bought them this way and never used them. Decided to change directions.
They are complete and come with. 600 lift Pac Springs in them
$800 or best offer.
I may intertain trades for some cathedral port heads plus cash or equal value trade. Maybe even a factory head/intake combo.
Open to offers and I can send and take. More pictures if needed.
Contact @ Turbotyler@yahoo.com
Last edited by turbotyla; 01-20-2014 at 09:56 PM.
#5
bump.
Come on people these are great heads just don't allow for me to use the cam I want.
They are not bsp small bore I keep getting that question. The only difference is these have just factory gm valves. Bsp heads have fererra valves.
both are same specs and gm as cast heads.
Come on people these are great heads just don't allow for me to use the cam I want.
They are not bsp small bore I keep getting that question. The only difference is these have just factory gm valves. Bsp heads have fererra valves.
both are same specs and gm as cast heads.