dsadsdaiouser

Finished installing all of our nitrous parts other than the wiring and started it this morning to check to check for leaks. I don't have fuel pressure on the gauge. Bad gauge? Did I install something incorrectly? All I did was unscrew the plastic cap on the end of the fuel rail and screw the manifold on as seen in the picture. Gauge is reading zero when I start the car.

Oh, by the way, the FPSS is coming out the bottom of the log from the other 1/8" port.



Scott

streetlegalls1

iTrader: (15)

You have to remove the Schrader valve behind the plastic cap you removed

dsadsdaiouser

Thank you. I'm new to the LS1 and thought there was something that I was missing. I appreciate it.

Scott

streetlegalls1

iTrader: (15)

any time