anyone have an extra MSD tuning cable
#1
anyone have an extra MSD tuning cable
for the 6012? a 6010 may work too...
pulled my cable out today for the first time (used MSD box) and noticed that one of the pins is smashed down into the connector. if anyone has an extra to sell, i need one...
pulled my cable out today for the first time (used MSD box) and noticed that one of the pins is smashed down into the connector. if anyone has an extra to sell, i need one...
#4
You don't have any old printer cables laying around? Check your box of dead computer equipment or the bottom of a junk draw somewhere. Maybe your neighbor's or work's box of dead computer equipment.
BTW, chances are you could bend the pin back straight and it will work
BTW, chances are you could bend the pin back straight and it will work
Trending Topics
#11
and you can take some measurements of my traction bars while you're here.
#12
10 Second Club
New laptop forced me to buy an adapter from USB to serial
Anywho....Radio Shack is good for this stuff too...But since Zones offer was best, I'd go that way.
Anywho....Radio Shack is good for this stuff too...But since Zones offer was best, I'd go that way.
#14
i leave early and get home late during the week. i still need to get a few things done before we can actually drive it (safely). oh, and the trans controller is set up for an 80e and i'm still waiting for the tuning software to come in so i can change it over to 60e. still has no rear shocks (being custom built now) no rear diff cover, leaf springs are finger tight and there is no seats/carpet. hoping to knock all of that out this weekend. and you can swing by early next week. the following weekend i want to get it aligned and have exhaust installed.