00z28/ss hp/trq
#1
Teching In
Thread Starter
Join Date: Dec 2013
Location: las vegas nv
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
00z28/ss hp/trq
How much hp/trq am I looking at from stock bolting on an ls6 intake,ls2 Tb slp below and slp lid /slp loudmouth 1 and 3.23 gears
My goal is over 350+hp/360+trq
My goal is over 350+hp/360+trq
#2
TECH Senior Member
Back to your question, are you asking about flywheel hp or rear wheel hp? These cars make roughly ~350hp/375ft.lbs at the flywheel bone stock although they are underrated at 310-325hp stock.
If you want 350RWHP you will need LT headers, ORY, and a good dyno tune in addition to what you have.
#5
TECH Resident
iTrader: (1)
Start with the free mods first if they havent already been done amigo. It will add up to help you at and not cost you squat. Long Tube Headers, Delete Cats, Electronic Cutout, good muffler, LS6 Intake, K&N Air Filter with ram air mod and a good tune i bet you could see those numbers. These cars are suffocated for air in my opinion and there capable of much more the better they breathe. Start cheap work your way up. Underdrive pulley, shift kit if its A4 etc etc.
Its not all about horsepower at the numbers your looking for i would say its more the driver, with how efficient the car can use what it already has.
Its not all about horsepower at the numbers your looking for i would say its more the driver, with how efficient the car can use what it already has.