WHO NEEDS A FULL SET OF BOGART D10's WITH TIRES?
#1
9 Second Club
Thread Starter
iTrader: (4)
Join Date: Dec 2004
Location: Cali
Posts: 2,607
Likes: 0
Received 0 Likes
on
0 Posts
WHO NEEDS A FULL SET OF BOGART D10's WITH TIRES?
Category: Wheels & Tires
Price: $1200
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird
Location (State): CA
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6, LT1/LT4, Small Block, Big Block
LS Engine?: Fits LS Engine
For sale is a full set of drag wheels and tires. The highly desired Bogart D10's. These were custom made for me by SJM Manufacturing. The fronts are 15x4.5 and I'm running ET Fronts on them. The fronts have about 60% of their life still on them.
The rears are 15x9.75 and I have spacers that are included for a variety of brake combos that you might run to ensure they clear. I ran them with extended studs and the spacers to clear my stock brakes. Mounted on them is 28x10.5W ET Drags that have roughly 25-30 passes on them. The wear holes are still there and pretty deep. The wheels are balanced and have also already been modified with rim screws front and back done professionally.....
I AM ONLY ASKING $1200.00 FOR THE ENTIRE SET OF FOUR. BUYER MUST PAY SHIPPING, I WILL ACCEPT PAYPAL...... YOU WILL NOT FIND A BETTER QUALITY SET OF D10's FOR THIS PRICE ANYWHERE. THE RIMS HAVE PRACTICALLY ZERO BLEMISHES. THE LIPS ARE UNTOUCHED. NO CURB RASH. NOTHING. THEY HAVE ZERO STREET MILES AS THEY WERE ON A STORED RACECAR.......
#3
9 Second Club
Thread Starter
iTrader: (4)
Join Date: Dec 2004
Location: Cali
Posts: 2,607
Likes: 0
Received 0 Likes
on
0 Posts
Bogart does a strange custom offset but it's based on the standard F-body offset that most use...
15x8 are 5.5
15x9 are 6.5
15x10 are 7.5
These being that they are 9.75" wide are a 7.25" Backspacing/offset.... They are lined up nearly at the stock location (I have a standard width rearend)... I'll get you a shipping rate first thing in the morning but i'd imagine 100-150 through my company (I'm the shipping coordinator for my company) is about right to Rockvale, TN
15x8 are 5.5
15x9 are 6.5
15x10 are 7.5
These being that they are 9.75" wide are a 7.25" Backspacing/offset.... They are lined up nearly at the stock location (I have a standard width rearend)... I'll get you a shipping rate first thing in the morning but i'd imagine 100-150 through my company (I'm the shipping coordinator for my company) is about right to Rockvale, TN
Trending Topics
#14
9 Second Club
Thread Starter
iTrader: (4)
Join Date: Dec 2004
Location: Cali
Posts: 2,607
Likes: 0
Received 0 Likes
on
0 Posts
Not sure how these would fit on a 1st gen...... Assuming the lug pattern is the same I guess.....
Shipping has been ranging from 160-200 dollars to most Midwest states... East coast was 230......
Texas (Houston) was 175 bucks....
Birddogg sorry I didn't see the post about the "inside" of the wheel.... But I texted a bunch of pictures to that phone address and PM'd you back.....
Shipping has been ranging from 160-200 dollars to most Midwest states... East coast was 230......
Texas (Houston) was 175 bucks....
Birddogg sorry I didn't see the post about the "inside" of the wheel.... But I texted a bunch of pictures to that phone address and PM'd you back.....