Chevy LS high quality turbo kit components twin 66mm Turbonetics turbos
#1
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Jul 2008
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
Chevy LS high quality turbo kit components twin 66mm Turbonetics turbos
Category: Engine - Power Adders
Price: $2500
Location (State): MI
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine
2 - Turbonetics 6665-4 Lety 76mm turbo's with custom ordered .68 exhaust a/r housings. Was for a street 6.0L LS engine and a target of 1,000 horsepower. Comes with AN oil drain fittings and custom mounting brackets for a first generation camaro. https://turboneticsinc.com/store/ind...&product_id=80
2 - K&N cone air filters for above turbo's
2 - 1.75 double slip collectors in 304 stainless and a 3" vibrand v band flange (ordered from stainlessheaders.com). I paid $350 each for these
1 - Bag of collector locking tabs
10 - 1.75" 304 stainless J bends from stainlessheaders.com. One is cut in half
2 - 3/8 stainless high quality 304 Chevy LS engine flanges from stainlessheaders.com
2 - 304 stainless t4 flange to vibrant v band flange on a 3" bend radius
1 - 24x16x3.5 Intercooler with twin inlets & 1 outlet
$2500 for all.
Trending Topics
#11
On The Tree
iTrader: (2)
Join Date: May 2013
Location: Austin Texas
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
I see now I was looking at it last night on my phone and it looked like they were already complete on the smaller screen. Have you already build mounting brackets for the intercooler.
#14
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Jul 2008
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
If you look at the pictures in the first post that is everything you will be purchasing at the price above.
If you would like those bends I can include the picture below for an extra $200. Just so you know that is a custom tight radius bend mandrel 304SS tube with SS vibrand 3" vband flanges. The flanges alone cost $75 each and there are 4 of them
If you would like those bends I can include the picture below for an extra $200. Just so you know that is a custom tight radius bend mandrel 304SS tube with SS vibrand 3" vband flanges. The flanges alone cost $75 each and there are 4 of them