where can I find axle shafts for my 02 ten bolt?
#1
Teching In
Thread Starter
Join Date: Nov 2013
Location: Chapel Hill NC
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
where can I find axle shafts for my 02 ten bolt?
I've got a 2002 Trans Am and found out a few months ago that my passenger axle shaft is slightly bent and has a little wobble to it. My rear was already re-geared to 3.73 before I got the car so I don't want to just swap another complete 10 bolt in. I can't find shafts anywhere. My car has traction control and all the local junk yards have cars without traction that are either v6 or a few lt1 but still won't work.
Searching eBay doesn't turn up a whole lot either, are there any aftermarket shafts sold for a decent price that may be a little stronger? I searched summit and none of the ones they listed made it clear if they worked for a rear with traction or not.
And I don't want this to be a debate about a 10 bolt isn't strong enough, don't waste your money etc etc... at this point I just want my car to work and am not spending 1to 2k on a new rear diff. I want to spend as little as possible, if I eventually blow it up fine, I'll deal with it then but I want a good driver right now and I don't race.
Searching eBay doesn't turn up a whole lot either, are there any aftermarket shafts sold for a decent price that may be a little stronger? I searched summit and none of the ones they listed made it clear if they worked for a rear with traction or not.
And I don't want this to be a debate about a 10 bolt isn't strong enough, don't waste your money etc etc... at this point I just want my car to work and am not spending 1to 2k on a new rear diff. I want to spend as little as possible, if I eventually blow it up fine, I'll deal with it then but I want a good driver right now and I don't race.
#5
Teching In
Thread Starter
Join Date: Nov 2013
Location: Chapel Hill NC
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
I've built the axles in my jeep but they were a whole lot easier to shop for, only so many choices for a dana 44. When I try searching for 10 bolt parts I never find what I need because there's so many different iterations of the 10 bolt from 70s cars to trucks, and s10s to camaros, and different years are different in the 4th gen from what I've researched
#6
LS1Tech Sponsor
iTrader: (16)
http://shop.brutespeed.com/Moser-A10...er-A102805.htm
Moser A102805 - 10 Bolt 28 spline 93-02 F Body 3 Channel ABS
http://shop.brutespeed.com/Moser-A10...er-A102806.htm
Moser A102806 - 10 Bolt 28 spline 95-02 F Body 4 Channel ABS
Here are Moser replacement 10 bolt axles. Bob
Moser A102805 - 10 Bolt 28 spline 93-02 F Body 3 Channel ABS
http://shop.brutespeed.com/Moser-A10...er-A102806.htm
Moser A102806 - 10 Bolt 28 spline 95-02 F Body 4 Channel ABS
Here are Moser replacement 10 bolt axles. Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
#7
TECH Senior Member
iTrader: (96)
Join Date: Aug 2007
Location: Turnin' Wrenches Infractions: 005
Posts: 24,241
Likes: 0
Received 81 Likes
on
72 Posts
I've got a 2002 Trans Am and found out a few months ago that my passenger axle shaft is slightly bent and has a little wobble to it. My rear was already re-geared to 3.73 before I got the car so I don't want to just swap another complete 10 bolt in. I can't find shafts anywhere. My car has traction control and all the local junk yards have cars without traction that are either v6 or a few lt1 but still won't work.
Searching eBay doesn't turn up a whole lot either, are there any aftermarket shafts sold for a decent price that may be a little stronger? I searched summit and none of the ones they listed made it clear if they worked for a rear with traction or not.
And I don't want this to be a debate about a 10 bolt isn't strong enough, don't waste your money etc etc... at this point I just want my car to work and am not spending 1to 2k on a new rear diff. I want to spend as little as possible, if I eventually blow it up fine, I'll deal with it then but I want a good driver right now and I don't race.
Searching eBay doesn't turn up a whole lot either, are there any aftermarket shafts sold for a decent price that may be a little stronger? I searched summit and none of the ones they listed made it clear if they worked for a rear with traction or not.
And I don't want this to be a debate about a 10 bolt isn't strong enough, don't waste your money etc etc... at this point I just want my car to work and am not spending 1to 2k on a new rear diff. I want to spend as little as possible, if I eventually blow it up fine, I'll deal with it then but I want a good driver right now and I don't race.
http://www.ebay.com/itm/98-02-TRANS-AM-AXLES-2PCS-28-SPLINE-4-CHANNEL-ABS-TCS-10-BOLT-CAMARO-Z28-/181558623204?pt=Motors_Car_Truck_Parts_Accessories&hash=item2a45bcbbe4&vxp=mtr