Why so low dyno numbers??
#1
Teching In
Thread Starter
Join Date: Mar 2003
Location: Duncanville
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Why so low dyno numbers??
All my mods are in my Sig. I only ended up with 331 RWHP but with 370 RWTQ... WTF?! I don't think that my car would have a leak down problem because i made quite a bit of torque. I have a Z06 clutch (which isn't in my sig) also. I've had it for about 8 months now and I drive everywhere on nittos. If the clutch was slipping, would I be able to make 370 torque? Also, the A/F was right at 13.2. Once again... WTF?!
#2
Re: Why so low dyno numbers??
the clutch could have something to do with it your gears/midlengths are what are hurting you the most on dyno numbers. Just take it to track and see how u like it dyno queens mean nada if they cant run
#4
Teching In
Thread Starter
Join Date: Mar 2003
Location: Duncanville
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Re: Why so low dyno numbers??
unfortionatley, i did not ATAP the car when i had it dynoed... but i am going to re-dyno at a different place on wednesday and get it ATAP'd and see what the deal is. my a/f was not bad at all at the last one.. so i don't know what it could be.
#5
Teching In
Thread Starter
Join Date: Mar 2003
Location: Duncanville
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Re: Why so low dyno numbers??
unfortionatley, i did not ATAP the car when i had it dynoed... but i am going to re-dyno at a different place on wednesday and get it ATAP'd and see what the deal is. my a/f was not bad at all at the last one.. so i don't know what it could be.