HELP have ls1 edit installed cam cannot get to idle
#1
Teching In
Thread Starter
Join Date: Jun 2004
Location: Strongsville Ohio
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
HELP have ls1 edit installed cam cannot get to idle
Installed a 224 228 580 lift on 114+2 lsa in a C5 along with heads and headers
I have ls1 edit and set the idle up to 950 but it just drops past 950 and dies
I drove if 250 miles today and if anything it is worse
Need some advice on what to do
Thanks
Kirby
I have ls1 edit and set the idle up to 950 but it just drops past 950 and dies
I drove if 250 miles today and if anything it is worse
Need some advice on what to do
Thanks
Kirby
#3
Curious how does one do the idle relearn process when the engine won't idle and only runs with help from the throttle peddle? I may have a fuel pressure issue, looking into that but was interested in the idle relearn process when it won't stay running without help.
#4
Teching In
Thread Starter
Join Date: Jun 2004
Location: Strongsville Ohio
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
idle
Originally Posted by Slowhawk
Have you done the idle relearn yet?It is very important on a C5.
Kirby